Issue №: 2(113)
The journal solves the problems of creation and improvement of machinery and technologies for agriculture: 131 - Applied Mechanics, 132 - Materials Science, 133 - Industrial Engineering, 141 - Power Engineering, Electrical Engineering and Electromechanics, 208 - Agricultural Engineering.
AUTOMATED TECHNOLOGICAL PROJECTION OF CLASSIFICATION PROCESSES OF DRY DISPERSIVE MATERIALS
Ivan Sevostianov – Doctor of Technical Sciences, Full Professor of the Department of “Technological Processes and Equipment of Processing and Food Productions” of Vinnytsia National Agrarian University (3 Solnechnaya St, Vinnytsia, 21008, Ukraine, e-mail: ivansev70@gmail.com, https://orcid.org/0000-0001-8965-9810).
Oleksii Tokarchuk – PhD, Associate Professor of the Department of “Technological Processes and Equipment of Processing and Food Productions” of the Vinnytsia National Agrarian University (3, Solnyshchaya St., Vinnytsia, 21008, Ukraine, e-mail: tokarchuk@vsau.vin.ua, https://orcid.org/0000-0001-8036-1743).
Maryna Pidlypna – Post-Graduate Student of Vinnytsia National Agrarian University (3, Solnychna str., Vinnytsia, Ukraine, 21008, e-mail: petrovnamarina940@gmail.com, https://orcid.org/0000-0002-1317-2018).
Processes of classification (separation) of dry and damp dispersive materials are wide spread in metallurgy, construction, agriculture, in chemical, food, processing industry and in other branches. Therefore, constructors and technologists pay a lot of attention for rationalization of these processes and equipment for their realization in direction of increase of productivity and quality of classification, reliability of machines, decrease of power-consuming. In last decades in Ukraine with development of small and middle farming enterprises there is a tendency of increase of variety of grain raw materials by kinds, grades, humidity, sizes, mass, density and volume of particles. All this should consider food and processing enterprises which often work in quite intensive regime in a period of harvest. So, in last time there become more strong demands to efficiency of technological preparation of processes classification for selection of most rational method, equipment and regimes of processing with consideration of parameters of raw materials and demands of further technological processes (grinding, mixing, heating, cooking, frying etc). Because of that, there will be useful a method of automated technological projection of classification processes of dry dispersive materials, proposed in this article. The method allows to elaborate most effective technology of classification with consideration of volume of output program, time for its fulfilment, geometrical and structural-mechanical properties of processed material, characteristics of available equipment for classification and criterions of efficiency of elaborated technology – productivity and specified operational expenses for its realization. The method can be used as a base for elaboration of a computer program of automated synthesis and analysis of rational technological processes of classification of grain raw materials.
[1] Elperin, I.V. (2017). Avtomatyzatsiia vyrobnychykh protsesiv [Automation of production processes]. Kyiv : Lira. [in Ukrainian].
[2] Syniehlazov, V.M., Serheiev, I.Iu. (2015). Avtomatyzatsiia tekhnolohichnykh protsesiv [Automation of technological processes]. Kyiv : Lira. [in Ukrainian].
[3] Vasylkivskyi, I.S., Fedynets, V.O., Yusyk, Ya.P. (2020) Vykonavchi prystroi system avtomatyzatsii [Executive devices of automation systems]. Lviv : Lvivska politekhnika. [in Ukrainian].
[4] Ivanyshyn, T.V., Mazepa, S.S. (2019). Osnovy avtomatyky ta avtomatyzatsiia vyrobnychykh protsesiv lisovykh ta derevoobrobnykh pidpryiemstv [Foundations of automatics and automation of production processes of forest and timber enterprises]. K.: Mahnoliia. [in Ukrainian].
[5] Trehub, V.H. (2019). Proektuvannia system avtomatyzatsii [Projection of automation systems]. Kyiv: Lira. [in Ukrainian].
[6] Yacenko, V.F., Sokolov, V.A., Sivakova, L.B. (1983). Osnovy avtomatizacii tekhnologicheskih processov pishchevyh proizvodstv [Foundations of automation of technological processes of food productions]. Moscow: Legkaya i pishchevaya promyshlennost'. [in Russian].
[7] Borodin, I.F., Nedil'ko, N.M. (1986). Avtomatizaciya tekhnologicheskih processov [Automation of technological processes]. Moscow: Agropromizdat. [in Russian].
[8] Akulovich, L.M., Sheleg, V.K. (2012). Osnovy avtomatizirovannogo proektirovaniya tekhnologicheskih processov v mashinostroenii [Foundations of automated projection of technological processes in machine building]. Minsk : Novoe znanie ; Moscow: INFRA-M. [in Russian].
[9] Samsonov, Y.I., Anisimov, O.N., Karev, E.A., Bulygina, M.N., Zlobin, P.I. (2000) Avtomatizirovannoe proektirovanie tekhnologicheskih processov mekhanicheskoj obrabotki zagotovok na stankah s CHPU [Automated projection of technological processes of blanks machining at NC-machines]. Ul'yanovsk: Ul'yanovsk State Technical University. [in Russian].
[10] Koval'chuk, E.R., Kosov, M.G., Mitrofanov, V.G. (1999). Osnovy avtomatizacii mashinostroitel'nogo proizvodstva [Foundations of automation of machine building production]. Moscow : Mashinostroenie. [in Russian].
[11] Timiryazev, V.A., Skhirtladze, A.G., Solnyshkin, N.P. (2016). Tekhnologiya proizvodstva i avtomatizirovannoe proektirovanie tekhnologicheskih processov v mashinostroenii [Technology of production and automated projection of technological processes in machine building]. Pskov: Pskovskij gosudarstvennyj universitet. [in Russian].
[12] Kondakov, A.I. (2007). SAPR tekhnologicheskih processov [CAD of technological processes]. Moscow: Izdatel'skij centr «Akademiya». [in Russian].
[13] Sevostianov, І. V. (2015). Racіonal'na poslіdovnіst' proektuvannja tehnologіchnih procesіv skladannja [Rational consecution of projection of assembly technological processes]. Naukovі pracі Vіnnic'kogo nacіonal'nogo tehnіchnogo unіversitetu, 1, 1–5. [in Ukrainian].
[14] Sevostianov, І. V. (2018). Avtomatizacіja proektuvannja tehnologіchnih procesіv mehanіchnoї obrobki ta skladannja [Automation of projection of technological processes of mechanical processing and assembly]. Vіsnik mashinobuduvannja ta transportu, 1(7), 112–120. [in Ukrainian].
[15] Sevostianov, I., Kravets, S., Pidlypna, M. (2020). Use of criterian synthesis and analysis for modernization of objects of machine building production. Engineering, Energy, Transport AIC, 2(109), 88–96. [in English].
[16] Sevostianov, I. V. (2021). Protsesy ta obladnannia dlia vibroudarnoho filtruvannia volohykh dyspersnykh seredovyshch : monohrafiia [Processes and equipment for vibro-blowing filtration of damp dispersive materials]. Vinnytsia : VNAU [in Ukrainian].
[17] Cherevko, O.I., Poperechnyi, A.M. (2014). Protsesy ta aparaty kharchovykh vyrobnytstv [Processes and apparatuses of food productions]. Kharkiv: Svit knyh [in Ukrainian].
[18] Sevostianov, I., Pidlypna, M. (2020). Model of optimization of functioning of modern polygraphic and publishing complexes. Engineering, Energy, Transport AIC, 4(111). 90–99. [in English].
About the journal
G8 – Materials Science
G9 – Applied Mechanics
G10 – Metallurgy
G11 – Mechanical Engineering (by specializations)
The journal "Engineering, Energy, Transport AIC" is indexed according to the following databases and catalogs:
The All-Ukrainian scientific journal “Technology, energy, agriculture transport AIC” is an open-access scientific publication that publishes the results of original research, theoretical and applied developments, as well as scientific papers in the fields of engineering sciences, energy systems, and transport technologies of the agro-industrial complex.
The main objective of the scientific journal “Technology, energy, agriculture transport AIC” is to disseminate the results of modern scientific research and to promote the development of technical, energy, and transport solutions for the agro-industrial complex through the publication of scientific materials characterized by scientific novelty and practical significance in the field of design and modernization of machinery, equipment, and technologies.
The journal’s activities are focused on supporting the development of engineering science, stimulating the implementation of innovative approaches into industrial practice, as well as ensuring effective exchange of scientific achievements among researchers, educators, engineers, and other specialists in relevant fields.
Objectives of the Journal
To achieve its defined objective, the journal ensures the implementation of the following key tasks:
· publication of the results of fundamental and applied research covering the fields of applied mechanics, mechanical engineering, materials science, energy systems, electrical engineering, electromechanics, and transport systems of the agro-industrial sector;
· promotion of the implementation of advanced technical and technological developments aimed at improving the efficiency of machinery, equipment, and production processes;
· creation of conditions for active scientific exchange among research institutions, higher education institutions, industrial enterprises, and other interested organizations;
· support for the development of interdisciplinary research and expansion of cooperation among specialists in various fields of science and technology;
· promotion of the improvement of the scientific and technical level of research related to the design, modernization, and operation of technical equipment used in agro-industrial production;
· dissemination of information on modern achievements in science and technology and the implementation of innovative technologies in the fields of technical support, energy, and transport;
· development of a scientific information environment that facilitates effective scientific communication and the integration of national research into the international scientific community.
Publication frequency: 4 issues per year
Languages of publication: Ukrainian, English
Editor-in-Chief: Vitalii YAROPUD
State Registration: Decision of the National Council of Ukraine on Television and Radio Broadcasting № 1337 and № 1180. Media Identifier: R30-05173
EDRPOU Code: 00497236
Publisher ROR: https://ror.org/05m3ysc06
Publisher DOI Prefix: 10.37128
Technology, energy, agriculture transport AIC is a scholarly professional journal with a long-standing history and stable academic tradition, reflecting the evolution of engineering and technical sciences within the agro-industrial sector of Ukraine.
The journal was founded in 1997 under the title Bulletin of Vinnytsia State Agricultural Institute. According to the Resolution of the Presidium of the Higher Attestation Commission of Ukraine dated September 11, 1997, the publication obtained the status of a professional scientific journal, which enabled the publication of the main results of doctoral and candidate dissertations in technical sciences. From its inception, the journal positioned itself as an academic platform for addressing current issues of mechanization, electrification, and technical support of agricultural production. During 2001–2014, the journal was published under the title Proceedings of Vinnytsia National Agrarian University. Series: Technical Sciences (State Registration Certificate of Print Media KV No. 16644-5116 PR dated April 30, 2010). Throughout this period, a systematic approach to the selection and peer review of scientific manuscripts was established, the thematic scope of publications was expanded, and continuity of scientific directions as well as the development of sectoral engineering schools was ensured. Since 2015, the journal has been published under its current title, Technology, energy, agriculture transport AIC (State Registration Certificate No. 21906-11806 R dated March 12, 2016). The change of title reflected the expansion of the journal’s thematic coverage and its orientation toward interdisciplinary research in mechanical engineering, energy systems, electrical engineering, transport technologies, automation, and digital solutions for the agro-industrial complex.
