Issue №: 2(113)
The journal solves the problems of creation and improvement of machinery and technologies for agriculture: 131 - Applied Mechanics, 132 - Materials Science, 133 - Industrial Engineering, 141 - Power Engineering, Electrical Engineering and Electromechanics, 208 - Agricultural Engineering.
COLLECTOR ENGINE CONTROL SYSTEM
Oleksandr Vozniak – сandidate of Science (Engineering), Associate Professor of the Department of Electric Power Engineering, Electrical Engineering and Electromechanics of Vinnitsa National Agrarian University (3 Soniachna St., Vinnitsa, 21008, Ukraine, email: alex.voz1966@gmail.com).
Andrii Shtuts – Assistant Professor, Department of Electric Power Engineering, Electrical Engineering and Electromechanics, Vinnitsa National Agrarian University (3, Solnechna str., Vinnitsa, 21008, Ukraine, email: shtuts1989@gmail.com, https://orcid.org/0000-0002-4242-2100).
Zamrii Mykhailo – 4th year student of specialty 208 of Agroengineering, Faculty of Engineering and Technology of Vinnytsia National Agrarian University (3, Solnychna st., Vinnytsia, 21008, Ukraine, e-mail: zamrij99@gmail.com).
One of the main features of the current stage of scientific and technological progress is the wider use of microelectronics in various sectors of the economy, which is constantly growing. The role of microelectronics in the development of social production is determined by its almost unlimited possibilities in solving various problems in all sectors of the economy, its profound impact on the culture and life of modern man.
Particular attention is now paid to the introduction of microprocessors that solve the problem of automation of control of mechanisms, devices and equipment. Adapting the microprocessor to the conditions of a particular task is mostly done by developing appropriate software, which is then stored in program memory. Hardware adaptation in most cases is performed by connecting the necessary integrated circuits and I / O that meet the problem to be solved.
In the given work the microprocessor system of regulation of turns of the collector motor of a direct current is developed. The microprocessor system is developed on the basis of the KM1816 BE 51 microprocessor using a DAC. The microprocessor program changes the engine speed in the range from 1000 to 3000 rpm.
In microprocessor technology there is an independent class of large integrated circuits (BIS) - single-chip microcomputers (OMEOM), which are designed to "intellectualize" devices for various purposes. The architecture of single-chip microcomputers is the result of the evolution of microprocessors and microprocessor systems, due to the desire to significantly reduce their hardware costs and cost. Typically, these goals are achieved both by increasing the integration of the BIS and by finding a compromise between cost, hardware costs and technical characteristics of the OMEOM.
Development of control systems on single-chip microcomputers is one of the most promising areas in the field of process automation, control and management.
[1] Vasyura, A. S., Krivogubchenko, S. G., Kulik, A. Ya., Kompanets, M. M. (1998). Elementi lokalnih sistem avtomatiki. VInnitsya: VDTU. [in Russian]
[2] Arsenev, Yu. N., Zhuravlev, V. M. (1991). Proektirovanie sistem logicheskogo upravleniya na mikroprotsessornyih sredstvah. M.: Vyisshaya shkola. [in Russian]
[3] Glotov, E. V., Fedorov, V. L. (1996). Konversionnaya produktsiya: kompleks ultrazvukovyih priborov kontrolya i regulirovaniya urovnya zhidkih sred. Priboryi i sistemyi upravleniya, 3, 42–45. [in Russian]
[4] Cherenkova, V. V. (2009). Promyishlennyie priboryi i sredstva avtomatizatsii: Spravochnik. L.: Mashinostroenie. [in Russian]
[5] Burenin, P. V. (1996). Radiolokatsionnyie impulsnyie ustroystva. Priboryi i sistemyi upravleniya, 10, 31–34. [in Russian]
[6] Chesakov, L. I., Shafranovskiy, M. N. (1995). Akusticheskie mnogofunktsionalnyie datchiki. Priboryi i sistemyi upravleniya, 9, 38–40. [in Russian]
[7] Stashin, V. V., Urusov, A. V., Mologontseva, O. F. (1990). Proektirovanie tsifrovyih ustroystv na odnokristalnyih mikrokontrolerah. M.: Energoatomizdat. [in Russian]
[8] Romanenko, V. D., Ignatenko, B. V. (1990). Adaptivnoe upravlenie tehnologicheskimi protsessami na baze mikro-EVM. K.: Vischa shkola. [in Russian]
[9] Presnuhin, L. N. (2010). Mikroprotsessoryi. M.: Vyisshaya shkola. [in Russian]
[10] Zubchuk, V.I. (1990). Spravochnik po tsifrovoy shemotehnike. K.: Tehnika. [in Russian]
[11] Yakubovskiy, S. V., Nisselson, L. Y. (2011). Tsifrovyie i analogovyie integralnyie mikroshemyi. M.: Radio i svIyaz. [in Russian]
About the journal
G8 – Materials Science
G9 – Applied Mechanics
G10 – Metallurgy
G11 – Mechanical Engineering (by specializations)
The journal "Engineering, Energy, Transport AIC" is indexed according to the following databases and catalogs:
The All-Ukrainian scientific journal “Technology, energy, agriculture transport AIC” is an open-access scientific publication that publishes the results of original research, theoretical and applied developments, as well as scientific papers in the fields of engineering sciences, energy systems, and transport technologies of the agro-industrial complex.
The main objective of the scientific journal “Technology, energy, agriculture transport AIC” is to disseminate the results of modern scientific research and to promote the development of technical, energy, and transport solutions for the agro-industrial complex through the publication of scientific materials characterized by scientific novelty and practical significance in the field of design and modernization of machinery, equipment, and technologies.
The journal’s activities are focused on supporting the development of engineering science, stimulating the implementation of innovative approaches into industrial practice, as well as ensuring effective exchange of scientific achievements among researchers, educators, engineers, and other specialists in relevant fields.
Objectives of the Journal
To achieve its defined objective, the journal ensures the implementation of the following key tasks:
· publication of the results of fundamental and applied research covering the fields of applied mechanics, mechanical engineering, materials science, energy systems, electrical engineering, electromechanics, and transport systems of the agro-industrial sector;
· promotion of the implementation of advanced technical and technological developments aimed at improving the efficiency of machinery, equipment, and production processes;
· creation of conditions for active scientific exchange among research institutions, higher education institutions, industrial enterprises, and other interested organizations;
· support for the development of interdisciplinary research and expansion of cooperation among specialists in various fields of science and technology;
· promotion of the improvement of the scientific and technical level of research related to the design, modernization, and operation of technical equipment used in agro-industrial production;
· dissemination of information on modern achievements in science and technology and the implementation of innovative technologies in the fields of technical support, energy, and transport;
· development of a scientific information environment that facilitates effective scientific communication and the integration of national research into the international scientific community.
Publication frequency: 4 issues per year
Languages of publication: Ukrainian, English
Editor-in-Chief: Vitalii YAROPUD
State Registration: Decision of the National Council of Ukraine on Television and Radio Broadcasting № 1337 and № 1180. Media Identifier: R30-05173
EDRPOU Code: 00497236
Publisher ROR: https://ror.org/05m3ysc06
Publisher DOI Prefix: 10.37128
Technology, energy, agriculture transport AIC is a scholarly professional journal with a long-standing history and stable academic tradition, reflecting the evolution of engineering and technical sciences within the agro-industrial sector of Ukraine.
The journal was founded in 1997 under the title Bulletin of Vinnytsia State Agricultural Institute. According to the Resolution of the Presidium of the Higher Attestation Commission of Ukraine dated September 11, 1997, the publication obtained the status of a professional scientific journal, which enabled the publication of the main results of doctoral and candidate dissertations in technical sciences. From its inception, the journal positioned itself as an academic platform for addressing current issues of mechanization, electrification, and technical support of agricultural production. During 2001–2014, the journal was published under the title Proceedings of Vinnytsia National Agrarian University. Series: Technical Sciences (State Registration Certificate of Print Media KV No. 16644-5116 PR dated April 30, 2010). Throughout this period, a systematic approach to the selection and peer review of scientific manuscripts was established, the thematic scope of publications was expanded, and continuity of scientific directions as well as the development of sectoral engineering schools was ensured. Since 2015, the journal has been published under its current title, Technology, energy, agriculture transport AIC (State Registration Certificate No. 21906-11806 R dated March 12, 2016). The change of title reflected the expansion of the journal’s thematic coverage and its orientation toward interdisciplinary research in mechanical engineering, energy systems, electrical engineering, transport technologies, automation, and digital solutions for the agro-industrial complex.
