Engineering, Energy, Transport AIC

Igor Tverdokhlib  – candidate of technical sciences, associate professor of the department of general technical disciplines and occupational safety, Vinnytsia National Agrarian University Vinniytsia (st. Sonyachna 3, VNAU, 21008, e-mail: igor_tverdokhlib@yahoo.com, https://orcid.org/0000-0003-1350-3232 )
Oleg Omelyanov – assistant of the department of general technical disciplines and occupational safety, Vinnytsia National Agrarian University (Vinniytsia, st. Sonyachna 3, VNAU, 21008, Ukraine, e-mail: omomelyanov@gmail.com, https://orcid.org/0000-0002-0441-6586 )

The article considers the state of scientific and technical developments in the field of improving the efficiency of vibration technology. Production activity in most branches of industrial production is provided by the work of various technological machines and vehicles. The operation of machines, equipment, mechanisms, apparatus and devices in the conditions of the need to ensure high productivity is often accompanied by significant dynamic loads, vibration processes and manifestations of shock interactions of machine elements. Ensuring the reliability and safety of machines requires at all stages of their life cycle serious attention to compliance with certain restrictions on the parameters of the dynamic state of technical objects, the development of methods and means of assessing control and management of dynamic interactions. Modern mechanical engineering is a scientific basis for solving the main problems of machine dynamics, which, in general, is based on scientific potential created by domestic and foreign scientists in the field of theoretical and applied mechanics, theory of mechanisms, dynamics and strength of machines, development of scientific directions in automatic control theory. applied system synthesis, etc. The results of scientific research are reflected in the works of famous scientists.
The formed practice of pre-design researches of the created machines, the equipment and the equipment is based on wide use of means of mathematical modeling, application of means of computer engineering. The choice of equipment in production is based on cost, productivity, size, energy consumption, etc.
In this regard, there is a question of the need to find and develop new approaches, methods and means to ensure the efficiency and reliability of technological machines and equipment.

[1]    Abiduev, A. A. (2018). Povy`shenie e`ffektivnosti tekhnologicheskikh proczessov frakczionnoj ochistki zerna i semyan: dis. … dokt. tekhn. nauk: 05.20.01. Ulan - Ude`. [in Russian].
[2]    Krupenya, E.Yu., Shishkina, A.P., Makarova N.S. (2016). Vibroprotirka detalej sredami organicheskogo proiskhozhdeniya s primeneniem nizkochastotny`kh kolebanij. Sovremenny`e aspekty` razvitiya nauki, obrazovaniya i modernizaczii promy`shlennosti: sb.tr. Vseros. nauch.-prakt. konf. Tekhnicheskie nauki (g. Taganrog, 20 maya 2016). Rostov n/D: DGTU, 182–186. [in Russian].
[3]    Vasil`ev, A.M., Machikhin, S.A., Strelyukhina, A.N., Ry`ndin, A.A. (2018). Povy`shenie e`ffektivnosti proczessov separirovaniya zernovy`kh smesej na riflenoj poverkhnosti. Khranenie i pererabotka sel`khozsy`r`ya. 3. 98–105. [in Russian].
[4]    Babichev, A.P., Motrenko, P.D., Gillespi, L.K. (2010). Primenenie vibraczionny`kh tekhnologij na operacziyakh otdelochno – zachistnoj obrabotki detalej. DGTU, Rostov n/D, 2010. [in Russian].
[5]    Gievskij, A.M. (2016). Povy`shenie e`ffektivnosti raboty` universal`ny`kh vozdushno-reshetchaty`kh zernoochistitel`ny`kh mashin : dis. … dokt. tekhn. nauk: 05.20.01 / Voronezh. [in Russian].
[6]    Nessler P. (2005). Modelling and control of vibration in mechanical systems. Uppsala Univ. Sweden. 102 p. URL: http://www.it.uu.se 2005. [in English].
[7]    Chelomej, V.N. (1981). Vibraczii v tekhnike : spravochnik v 6 tomakh. Vibraczionny`e proczessy` i mashiny. M.: Mashinostroenie, 1981. T. 4. [in Russian].
[8]    Panovko, G.Ya. (2008). Lekczii po osnovam teorii vibraczionny`kh mashin i tekhnologij: uchebnoe posobie. Moskva: izd-vo MGTU N.E`. Baumana. [in Russian].
[9]    Povi`dajlo, V.O. (2004) .Vi`braczi`jni` proczesi ta obladnannya. L`vi`v: Vidavnicztvo NU "L`vi`vs`ka poli`tekhni`ka". [in Russian].
[10]    Poturaev, V.N., Franchuk, V.P., Naduty`j, V.P. (2002). Vibraczionnaya tekhnika i tekhnologii v e`nergoemkikh proizvodstvakh. Dneproektrovsk: NGA Ukrainy. [in Russian].
[11]    Solona, O.V. (2020). Kerovanij vi`braczi`jnij mlin dlya pomolu sipkogo seredovishha. Vi`braczi`yi v tekhni`czi` ta tekhnologi`yakh, 4(99), 11–20. [in Ukrainian].
[12]    Babichev, A.P., Babichev, I.A. (2008). Osnovy` vibraczionnoj tekhnologii. Rostov-na-Donu: izd-vo czentr DGTU. [in Russian].
[13]    Vajsberg, L.A., Zarogatskij, L.P., Turkin, V.Ya. (2004). Vibraczionny`e drobilki. Sankt-Peterburg: izd-vo Vserossijskij nauchno-issledovatel`skij geologicheskij institut im. A.P. Karpinskogo. [in Russian].
[14]    Eliseev, A.V., Mamaev, L.A., Sitov, I.S. (2015). Nekotory`e podkhody` k obosnovaniyu skhemy` inerczionnogo vozbuzhdeniya v tekhnologicheskikh vibraczionny`kh mashinakh. Sistemy`. Metody`. Tekhnologii, 4 (28), 15–24. [in Russian].
[15]    Franchuk, V.P. (2001). Inzhenerny`e metody` rascheta i vy`bora dinamicheskikh parametrov vibraczionny`kh grokhotov, konvejerov, pitatelej. Dnepropetrovsk: Zbagachennya korisnikh kopalin. Naukovotekhnichnij zbirnik, 12 (53), 126–143 [in Russian].
[16]    Omel`yanov, O.M., Zamri`j, M.A. (2020). Napryamki pi`dvishhennya efektivnosti` roboti vi`braczi`jnikh tekhnologi`chnikh mashin. Vi`braczi`yi v tekhni`czi` ta tekhnologi`yakh, 4(99), 49–58. [in Ukrainian].
[17]    Kupchuk, I`.M. (2018). Perspektivi rozvitku konstruktivnikh skhem vi`braczi`jnikh privodi`v transportnikh i` tekhnologi`chnikh mashin APK. Vi`braczi`yi v tekhni`czi` ta tekhnologi`yakh, 3(90), 44–52. [in Ukrainian].
[18]    Fal`ko, O.L., Kovalenko, A.V. (2011). Energozberi`gayucha skhema roboti vi`braczi`jnogo transportera z dekoyu novoyi konstrukczi`yi. Problemi kharchovikh tekhnologi`j i` kharchuvannya. Suchasni` vikliki i` perspektivi rozvitku : tez dop. VII Mi`zhnar. nauk.-prakt. konf., 7–9 veres. 2011 r., Donecz`k–Svyatogi`rs`k. Donecz`k, 196–197. [in Ukrainian].
[19]    Karnovsky, I.A., Lebed, E. (2016). Theory of Vibration Protection. Springer International Publishing, Switzerland. [in English]
[20]    Adamchuk, V.V., Bulgakov, V.M., Kaletni`k, G.N., Kuczenko A.G. (2017). Ispol`zovanie pryamogo metoda granichny`kh e`lementov pri issledovanii staczionarny`kh kolebanij plastin. Vi`braczi`yi v tekhni`czi` ta tekhnologi`yakh, 1 (84), 8–14. [in Russian].
[21]    Chubik, R.V., Yaroshenko, L.V. (2008). Metod stabi`li`zaczi`yi tekhnologi`chno optimal`nikh parametri`v vi`braczi`jnogo polya adaptivnikh vi`braczi`jnikh tekhnologi`chnikh mashin . Vi`braczi`yi v tekhni`czi` ta tekhnologi`yakh, 2(51), 57–60. [in Ukrainian]
[22]    Kopy`lov, Yu. R. (2011). Dinamika proczessov vibroudarnogo uprochneniya. Voronezh: Nauchnaya kniga. [in Russian].
[23]    Lebedev, V.A., Shishkina, A.P., Krupenya, E.Yu. (2017). Povy`shenie kachestva vibrootdelki poverkhnostej vy`sokotochny`kh detalej sredami organicheskogo proiskhozhdeniya. Vestnik RGATU im. P.A. Solov`eva. Ry`binsk: RGATU, 2(41), 132–137. [in Russian].
[24]    Salenko, Yu.S. (2015). Opredelenie raczional`ny`kh parametrov vibraczionnogo transportera. Zbi`rnik naukovikh pracz` Naczi`onal`nogo uni`versitetu «Poltavs`ka poli`tekhni`ka i`meni` Yuri`ya Kondratyuka».Seri`ya: Galuzeve mashinobuduvannya, budi`vnicztvo. Poltava, 2 (44), 3–9. [in Russian].