Issue №: 3 (106)
The journal addresses the problems of creating and improving machinery and technologies for agriculture, food and processing industries, mechanical engineering, energy and transport.
DEVICE FOR INCREASING THE PRODUCTIVITY OF MILLING MACHINE OPERATION WITH CNC MCV-1000
Koval’ova Iryna - Assistant of the department "Machines and equipment of agricultural production" of
Vinnytsia National Agrarian University (3, Sonyachna St., Vinnytsia, 21008, Ukraine, e-mail: kovirinka@
vsau.vin.ua).
Тhe work of the milling machine with the CNC MCV-1000 is considered. A device that
significantly improves the productivity of this machine when performing the operation of milling round
holes along the outer surface of the pipe with a certain step is shown. The results obtained by
experimental means are indicated. Analysis of current trends in the development of machine tool industry
indicates the need to increase the technical level of metalworking equipment with developed complexes of
technological operations. A significant role is played by the equipment of metalworking machines,
namely, specialized devices for various types of processing. The goal is to increase metalworking
productivity.
As a result of the analysis of existing devices revealed their advantages and disadvantages. A new
design of the device for the simultaneous processing of four pipes with a length of up to 1000 mm and a
diameter of 32 mm on a MCV-1000 CNC milling machine is proposed. This device is designed for reliable
fixation of four pipes simultaneously for the operation of milling round holes along the outer surface of
the pipe with a certain step. The introduction of this device showed a double increase in productivity
compared with the previous device, which was used at the enterprise.
[1]. Lakirev, S. G. (2004). Obrabotka otverstiy: spravochnik [Hole processing: reference book]. Moscow:
Mashinostroyeniye [in Russian].
[2]. Kipchars’kyy, V. P. (2018). Metalorizal’ni verstaty : navch. posibnyk [Metal-cutting machines:
tutorial]. Mariupol’: DVNZ «PDTU» [in Ukrainian].
[3]. Pentyuk, B. M, Iskovych-Lototskyy, R. D., Shturma, A. L. (2001). Prohresyvni konstruktsiyi ta
vykorystannya rotatsiynykh instrumentiv: navch. posibnyk. [Progressive designs and use of rotary
tools: tutorial]. Vinnytsya: VDTU [in Ukrainian].
[4]. Vayntraub, M. A., Zasel’s’kyy, V. Y., Popolov, D. V. (2015). Tekhnolohiya verstatnykh robit: navch.
posibnyk [Machine-tool technology: tutorial]. Kyiv [in Ukrainian].
[5]. Styskin, H. M., Revnivtsev, M. P., Berizko, M. M., Hayevs’kyy, V. D. (2002). Tekhnolohichni osnovy
prohramuvannya obrobky detaley na verstatakh z chyslovym prohramnym keruvannyam
[Technological fundamentals of programming parts processing on numerically controlled machine
tools]. L.: Oriyana-Nova [in Ukrainian].
[6]. Iskovich-Lototsky, R. D., Veselovskaya, N. R., Zelinskaya, O. V., Veselovsky, Y. P. (2017)
Otsinyuvannya efektyvnosti funktsionuvannya tekhnolohichnoho kompleksu z vykorystannyam
systemnoho pidkhodu [Assessing the efficiency of the technological complex using a system
approach], No2 (97), 109 – 114, Tekhnika, enerhetyka, transport APK [in Ukrainian].
[7]. Ostrovsky, A. Y. (2018) Innovatsiynyy pidkhid u vykorystanni universalʹno-skladalʹnykh prystosuvanʹ
[An innovative approach in the use of universal-assembly devices], No3 (102), 86 – 90, Tekhnika,
enerhetyka, transport APK [in Ukrainian].
About journal
131 - Applied Mechanics
132 - Materials Science
133 - Industry engineering
141 - Power engineering, electrical engineering and electromechanics
208 - Agricultural engineering
The magazine "Engineering, Energy, Transport AIC" is included in the list of scientific professional editions of Ukraine on technical sciences
(Category "Б", Order of the Ministry of Education and Science of Ukraine dated 02.07.2020 №886)
Old version of site: http://tetapk.vsau.edu.ua, http://techjournal.vsau.org
According to the decision of National Council of Television and Radio Broadcasting of Ukraine from 25.04.2024 No. 1337 the scientific journal «Engineering, Energy, Transport AIC» has the ID of the Media R30-05173.
The journal "Engineering, Energy, Transport AIC" is indexed according to the following databases and catalogs:
Certificate of state registration of mass media: No. 21906-11806 P dated 03/12/2016.
Founder of the journal: Vinnytsia National Agrarian University
Editor-in-chief: Oleksii Tokarchuk - Ph.D., Associate Professor, VNAU (Vinnytsia)
Deputy Editor-in-Chief: Natalia Veselovska - Doctor of Technical Sciences, Full Prof., VNAU (Vinnytsia)
Executive Secretary: Yuriy Polevoda- Ph.D., Associate Professor, VNAU (Vinnytsia)
Members of the Editorial Board:
Tokarchuk O.A. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Veselovska N.R. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Agrarian University
Polevoda Yu.A. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Jordan Todorov Maximov - Doctor of Technical Sciences, Full Professor, Technical University of Gabrovo (Bulgaria)
Bulgakov V.M. - Doctor of Technical Sciences, Full Professor, Acad. NAAS, National University of Life and Environmental Sciences of Ukraine
Hraniak V.F. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Ivanchuk Y.V. - Doctor of Technical Sciences, Associate Professor, Vinnytsia National Technical University
Iskovich-Lototsky R.D. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Technical University
Kupchuk I.M. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Sevostianov I.V. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Agrarian University
Spirin A.V. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Tverdokhlib I.V. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Tsurkan A.V. - Doctor of Technical Sciences, Associate Professor, Vinnytsia National Agrarian University
Yaropud V.M. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Type of publication: journal
Kind of publication: scientific
Publication status: domestic
Year of foundation: 1997
Periodicity: 4 times per year
Volume: 18-20 conv. print. sheet (А4)
ISSN: 2520-6168 (print version), (online version)
Language of publication: (mixed languages) Ukrainian, English
The sphere of distribution and category of readers: national, foreign, faculty, scientists, entrepreneurs.
The periodical edition is included to the List of scientific professional publications of Ukraine on technical sciences, approved by order of the Ministry of Education and Science of Ukraine in 05.16.2016, No. 515.
The journal "Engineering, Energy, Transport AIC" is included in the "Catalog of Ukrainian Publications".
Subscription to the journal can be issued in each post office. The subscription index is 99720.
It was founded in 1997 under the title "Bulletin of the Vinnitsa State Agricultural Institute." According to the Decree of the Presidium of the Higher Attestation Commission of Ukraine of September 11, 1997, this publication received the status of a professional in which it is allowed to publish the main results of dissertation researches.
In 2001-2014 the journal published under the title “Collection of scientific works of Vinnytsia National Agrarian University. Series: Technical Sciences "(Certificate of State Registration of Mass Media KV No. 16644-5116 PR of 04/30/2010).
Since 2015 journal has title "Engineering, Energy, Transport AIC" (Certificate of State Registration of Mass Media No. 21906-11806 P dated 03/12/2016).
