Issue №: 4 (123)
The journal solves the problems of creation and improvement of machinery and technologies for agriculture: 131 - Applied Mechanics, 132 - Materials Science, 133 - Industrial Engineering, 141 - Power Engineering, Electrical Engineering and Electromechanics, 208 - Agricultural Engineering.
INNOVATIVE METHODS OF EXPANDING THE FUNCTIONAL CAPABILITIES OF THE SINGLE-SPINDLE LATHE
Nataliia Veselovska – Doctor of Technical Sciences, Professor, Head of the Department of Machines and Equipment of Agricultural Production of Vinnitsa National Agrarian University (3 Soniachna St., Vinnytsia, Ukraine, 21008, e-mail: wnatalia@ukr.net, https://orcid.org/0000-0001-9399-6721).
Artem Kosakovskyi – Postgraduate student department of machinery and equipment of agricultural production of agricultural production of Vinnitsa national agrarian university (3 Soniachna st., Vinnitsa, 21008, Ukraine, https://orcid.org/0009-0003-5028-251X).
Vitalii Romanov – postgraduate student department of machinery and equipment of agricultural production of agricultural production of Vinnitsa national agrarian university (3 Soniachna st., Vinnitsa, 21008, Ukraine, romanovvetal21@gmail.com, https://orcid.org/0000-0002-1721-7922).
Turret lathes, which are automated turret machines, are widely used in large-scale and mass production. The use of automatic machines in small-scale production, which has a significant specific weight in instrument construction, was considered inadvisable until recently due to the fact that their reconfiguration takes a lot of time.
Currently, thanks to the expansion of processing methods, which allow with minimal time consumption to go from the production of one part to the production of another part of the same group, automatic machines are increasingly used in small-scale production.
The introduction of innovative methods to expand the technological capabilities of machines should go not only by increasing the accuracy of processing, a wider use of the expansion of functionality can be realized by equipping with auxiliary devices that can perform operations that improve the production of parts. One of the ways to improve the productivity of the automatic lathe is to use shaped cutters, which allow you to process the part faster and with better quality, and with the help of developing a methodology for calculating and adjusting the cams.
The expansion of the technological capabilities of automatic machines should not only go by increasing the accuracy of processing, a wider use of the expansion of functional capabilities can be realized by equipping them with auxiliary devices that can perform such operations that improve production. One of the ways to improve the productivity of the automatic lathe is to use shaped cutters, which allow you to process the part faster and with better quality, and with the help of developing a methodology for calculating and adjusting the cams. Therefore, the topic of the article is relevant.
[1] Tarelnyk, V.B., Konoplyanchenko, E.V., Zubko, V.M. (2023). Industrial mechanical engineering: a textbook. Kyiv. [in Ukrainian].
[2] Bondarenko, S.G. (2005). Fundamentals of mechanical engineering technology. Chernihiv: ChDTU. [in Ukrainian].
[3] Bondarenko, S.G. (2009). Fundamentals of mechanical engineering technology: teaching. study guide of higher technology education institutions. Lviv : Magnolia. [in Ukrainian].
[4] Bondarenko, S.G. (2008). Technologies of mechanical assembly production : monograph. Nizhyn : LLC “Aspect-Polygraph Publishing House”. [in Ukrainian].
[5] Zakharkin, O.U. (2009). Technological foundations of mechanical engineering (main methods of surface treatment and modern T-systems for their implementation): textbook. Sumy : Publishing House of Sumy State University. [in Ukrainian].
[6] Rudenko, P.O. (1993). Design of technological processes in mechanical engineering : training manual. Kyiv : Higher School. [in Ukrainian].
[7] Sologub, M.A., Rozhnetsky, I.O., Nekoz, O.I. (2002). Technology of structural materials: a textbook for students. fur special higher education closing : 2nd ed., revised. and additional. Kyiv : Higher School. [in Ukrainian].
[8] Altintas, Y. (2012). Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design. Cambridge University Press. [in English].
[9] Kosakivskyi, A.Yu. (2015). Expanding the functionality of the 1D112 single-spindle lathe-turner machine: mag.qual.robota. Vinnytsia. [in Ukrainian].
[10] Barabash, V.I. (2023). Study of the functional capabilities of a single-spindle lathe-turner automatic machine: M.Sc. Qual. Robota. Vinnitsa. [in Ukrainian].
[11] Zhang, L. Allanore, A., Wang, C., Yurko, JA, Crapps, J. (2013). Materials Processing Fundamentals. John Wiley & Sons, Inc., Hoboken, NJ, USA. [in English].
[12] Bondarenko, S.G. (1993). Dimensional calculations of mechanical assembly production: training. Guide. Kyiv : ISDO. [in Ukrainian].
[13] Iskovych-Lototsky, R., Zelinska, O., Ivanchuk, Y., Veselovska, N. (2017). Development of the evaluation model of technological parameters of shaping workpieces from powder materials. Eastern-European Journal of Enterprise Technologies, 1 (1-85), 9–17. DOI: 10.15587/1729-4061.2017.59418. [in English].
[14] Turych, V., Veselovska, N., Rutkevych, V., Shargorodsky, S. (2017). Investigation of the process of thread extrusion using the ultrasound. Eastern-European Journal of Enterprise Technologies, 6 (1-90), 60–68. DOI: 10.15587/1729-4061.2017114561. [in English].
[15] Iskovych-Lototsky, R.D., Ivanchuk, Y.V., Veselovska, N.R., Surtel, W., Sundetov, S. (2018). Automatic system for modeling vibro-impact unloading bulk cargo on vehicles. Proceedings of SPIE - The International Society for Optical Engineering, 10808, 1080860. [in English].
[16] Shatokhin, V., Ivanchuk, Y., Dvirna, O., Veselovskaya, N., Jurczak, W. (2022). Dynamic Processes Modeling in a Peristaltic Pump with a Hydraulic Drive for the Bingham Fluid. Advances in Science and Technology Research Journal, 16 (4), 256–269. [in English].
[17] Spirin, A., Borysiuk, D., Tsurkan, O., Tverdokhlib, I., Veselovska, N., Edl, M. (2023). Ways of Intensification of Grass Seed Production. Journal of Engineering Sciences, 10 (1), F11–F19. [in English].
[18] Veselovska, N.R., Iskovich-Lototskyi, R.D., Kovaleva, I.M. (2019). Theory of cutting and tools: a study guide. Vinnytsia : VNAU. [in Ukrainian].
[19] Veselovska, N.R., Zelinska, O.V. (2020). Models of integrated computer systems for managing technological processes based on modern information technologies : monograph. Vinnytsia: TOV "TVORI". [in Ukrainian].
[20] Matviychuk, V.A., Veselovska, N.R., Shargorodskyi, S.A. (2021). Mathematical modeling of the latest technological systems : monograph. Vinnytsia : VNAU. [in Ukrainian].
About journal
The magazine "Engineering, Energy, Transport AIC" is included in the list of scientific professional editions of Ukraine on technical sciences
(Category "Б", Order of the Ministry of Education and Science of Ukraine dated 02.07.2020 №886)
According to the decision of National Council of Television and Radio Broadcasting of Ukraine from 25.04.2024 No. 1337 the scientific journal «Engineering, Energy, Transport AIC» has the ID of the Media R30-05173.
The journal "Engineering, Energy, Transport AIC" is indexed according to the following databases and catalogs:
Certificate of state registration of mass media: No. 21906-11806 P dated 03/12/2016.
Founder of the journal: Vinnytsia National Agrarian University
Type of publication: journal
Kind of publication: scientific
Publication status: domestic
Year of foundation: 1997
Periodicity: 4 times per year
Volume: 18-20 conv. print. sheet (А4)
ISSN: 2520-6168 (print version), (online version)
Language of publication: (mixed languages) Ukrainian, English
The sphere of distribution and category of readers: national, foreign, faculty, scientists, entrepreneurs.
The periodical edition is included to the List of scientific professional publications of Ukraine on technical sciences, approved by order of the Ministry of Education and Science of Ukraine in 05.16.2016, No. 515.
The journal "Engineering, Energy, Transport AIC" is included in the "Catalog of Ukrainian Publications".
Subscription to the journal can be issued in each post office. The subscription index is 99720.
Technology, energy, agriculture transport AIC is a scholarly professional journal with a long-standing history and stable academic tradition, reflecting the evolution of engineering and technical sciences within the agro-industrial sector of Ukraine.
The journal was founded in 1997 under the title Bulletin of Vinnytsia State Agricultural Institute. According to the Resolution of the Presidium of the Higher Attestation Commission of Ukraine dated September 11, 1997, the publication obtained the status of a professional scientific journal, which enabled the publication of the main results of doctoral and candidate dissertations in technical sciences. From its inception, the journal positioned itself as an academic platform for addressing current issues of mechanization, electrification, and technical support of agricultural production.
During 2001–2014, the journal was published under the title Proceedings of Vinnytsia National Agrarian University. Series: Technical Sciences (State Registration Certificate of Print Media KV No. 16644-5116 PR dated April 30, 2010). Throughout this period, a systematic approach to the selection and peer review of scientific manuscripts was established, the thematic scope of publications was expanded, and continuity of scientific directions as well as the development of sectoral engineering schools was ensured.
Since 2015, the journal has been published under its current title, Technology, energy, agriculture transport AIC (State Registration Certificate No. 21906-11806 R dated March 12, 2016). The change of title reflected the expansion of the journal’s thematic coverage and its orientation toward interdisciplinary research in mechanical engineering, energy systems, electrical engineering, transport technologies, automation, and digital solutions for the agro-industrial complex.
The journal consistently adheres to the principles of open science. All published materials are distributed under the Creative Commons Attribution 4.0 International License (CC BY 4.0), ensuring open access to research results provided proper attribution to the authors and the original publication is maintained.
At present, Technology, energy, agriculture transport AIC is an authoritative professional scientific journal (Category B), providing a platform for the publication of fundamental and applied research results, promoting the integration of education, science, and industry, and contributing to the advancement of engineering and technological support of the agro-industrial complex of Ukraine.
