Technology, energy, agriculture transport AIC

Veselovska Nataliia Rostislavovna–PhD, Professor, Department of machinery and equipment of agricultural production of Agricultural Production of Vinnitsa National Agrarian University (3 Soniachna St., Vinnitsa, 21008, Ukraine, wnatalia@ukr.net).
Alexander Malakov– postgraduate student of the Department of Machines and Equipment for Agricultural Production of the Vinnytsia National Agrarian University (3, Solnyschaya Str., Vinnytsia, Ukraine, 21008, malakovsana@gmail.com).
SergiyBurlaka– assistant of the department "Electric Power Engineering, Electrical Engineering and Electromechanics" of the Vinnytsia National Agrarian University (3, Solyaschaya str., Vinnytsia, 21008, Ukraine, email: ipserhiy@gmail.com).

Maintaining the required cut height minimizes losses and ensures continuous shoe contact with the surface. Thus the excessive pressure of the shoe destroys the stubble and leads to its accelerated wear, and insufficient pressure is accompanied by increased losses and provokes the galloping of the header.
An analytical solution to the problem of modeling the mechanism of the KPP-4.2 hanging is an iterative execution of the analysis procedures based on the formed hypothesis, as well as the procedures of comparison and selection of options in the procedure of parametric synthesis. It is a choice of a combination of internal parameters of the flattening device, which, while satisfying the functional limitations, simultaneously stabilize the whole mechanism.
A study and analysis of the hanging mechanism of a mower-conditioner trailed KPP-4.2 using methods of theoretical mechanics, differential and integral calculus, probability theory, mathematical modeling and computer software. A geometric model has been created for calculating and optimizing the operation of the hanging mechanism. The MVA KPP-4.2 output parameters were calculated for three different cut heights.

[1]    Artobolevskyy, Y.Y. (1988). Teoryya mekhanyzmov y mashyn.M.: Mashynobuduvannya.[inRussian].
[2]    Popov, V.B. (2000). Analitychnivyrazykinematychnykhperedavalʹnykhfunktsiymekhanizmivnaviskyenerhonosiyiv [Analytical expressions of the kinematic transfer functions of the mechanisms of the energy carrier attachment].VisnykHHTUim. P.O. Sukhoho,(2), 25–29.[inUkrainian].
[3]    Pryshlyak,V.M., Pyasetsʹkyy,A.A., Burlaka,S. A. (2014). Doslidzhennyaperspektyvnykhmashynnykhtekhnolohiyzvykorystannyamvidnovlyuvalʹnykhpalyvnykhresursiv[Investigationofadvancedmachinetechnologiesusingrenewablefuelresources].Zbirnyknaukovykhpratsʹ Vinnytsʹkohonatsionalʹnohoahrarnohouniversytetu.(2), 212–219.[inUkrainian].
[4]    Karabektas, M.,Ergen, G., Hosoz, M. (2008).The effects of preheated cottonseed oil methyl ester on the performance and exhaust emissions of a diesel engine.Applied Thermal Engineering.(28). 2136–2143.[in English].
[5]    Siatis, N.G.,Kimbaris,A.C., Pappas,C.S., Tarantilis,P.A., Polissiou, M.G. (2006).Improvement of biodiesel production based on the application of ultrasound: Monitoring ofthe procedure by FTIR spectroscopy.JAOCS.(83), 53–57.[in English].
[6]    De A. Rodrigues, J.,De P. Cardoso, F., Lachter, E.R., Estevao, L.R.M., Lima, E., Nascimento R.S.V. (2006).Chemical structure and physical properties of vegetable oil esters.JAOCS.(83), 353–357.[in English].
[7]    Malakov, O.I., Burlaka, S. A., Yaroshchuk, R. O. (2018). Znyzhennya navantazhennya elementiv konstruktsiyi mosta kerovanykh kolis samokhidnoyi kosarky shlyakhom ratsionalʹnoyi ustanovky hidrotsylindriv [Reducing the load on the structural elements of the self-propelled mower-driven steering axle by rationally positioning the hydraulic cylinders].Visnyk Khmelnytskoho natsionalnoho universytetu.(4), 56–61. [inUkrainian].