Technology, energy, agriculture transport AIC

Hraniak Valerii – Ph.D, Associate Professor of Power Engineering, Electrical Engineering and Electromechanics of Vinnytsia National Agrarian University (3, Sonychna St., Vinnytsia, 21008, Ukraine, +380672799498, titanxp2000@ukr.net, https://orcid.org/0000-0001-6604-6157).
Kupchuk Ihor – Ph.D, Senior Lecturer of the Department of General Technical Disciplines and Labor Protection of Vinnytsia National Agrarian University (3, Sonychna St., Vinnytsia, 21008, Ukraine, +380978173992, kupchuk.igor@i.ua, http://orcid.org/0000-0002-2973-6914).
Gontar Volodymyr – master's degree in specialty 133 «Sectoral Mechanical Engineering» of Vinnytsia National Agrarian University (3, Sonychna St., Vinnytsia, 21008, Ukraine, +380683260329, bulbashka31@gmail.com).

Today, the vast majority of technological processes, both production and agriculture, are based on the use of electric machines. Among which, a significant part of production equipment requires the use of electric motors, the power of which exceeds hundreds of kilowatts. Such electric machines have also become widespread as generating equipment, where they are an integral part of power plants, both using traditional energy sources (thermal power plants, nuclear power plants, etc.), and renewable (hydroelectric power plants, wind farms, etc.), where the unit power of a single electrical machine is usually higher than in other sectors of economy.
When operating such equipment, systems for monitoring a significant number of technological parameters are often used, and in real time it characterizes the modes of their operation. This approach makes it possible to increase the reliability of operation and, with a fairly high probability, to avoid large-scale man-made threats that can be caused by an emergency failure of power electric machines (including powerful electric generators), which are quite often accompanied by the destruction of supporting structures, structural elements of industrial premises and can pose a threat to the life and health of production personnel. But the use of even the most modern systems for monitoring the technical condition does not provide one hundred percent reliability, and when operating electrical machines with a nominal power of the order of units of MW and below, their use can significantly increase the total cost of equipment with a still quite high level of occurrence of a serious man-made accident. Therefore, the development of direct methods and means for measuring the technical parameters of electrical machines in general, and insulation parameters in particular, is an urgent scientific and applied problem.
In the article was proposed a new method of direct automated measuring control of insulation of windings of an electric machine, based on the use of combined signals to determine the technical parameters of the insulation of electrical machine units. And also, the design of the measuring control has been developed, it implements the proposed method.

[1]    Matviichuk, V. A., Rubanenko, O. Ie., & Rubanenko, O. O. (2015). Osoblyvosti elektropostachannia potuzhnykh pidpryiemstv APK z vykorystanniam mikromerezh ta rozpodilenykh dzherel elektroenerhii [Features of power supply of powerful agro-industrial enterprises with the use of micro-networks and distributed power sources]. Zbirnyk naukovykh prats VNAU: Seriia tekhnichni nauky – Collection of scientific works of VNAU: Series of technical sciences, 2 (90), 117-123 [In Ukrainian].
[2]    Kaletnyk, G. M. (2019). Perspektyvy pidvyshchennia enerhetychnoi avtonomii pidpryiemstv APK v ramkakh vykonannia enerhetychnoi stratehii Ukrainy [Prospects for increasing energy autonomy of the agriculture in accordance with the energy strategy of Ukraine]. Vìsnik agrarnoï nauki Pričornomor'â – Ukrainian Black Sea region agrarian science, 4, 90-98. doi: 10.31521/2313-092X/2019-4(104)-10 [In Ukrainian].
[3]    Matviichuk, V. A., Rubanenko, O. O. & Yavdyk, V. V. (2016). Analiz rezhymiv roboty mikroelektromerezh i metodiv keruvannia nymy [Analysis of modes of operation of microelectric networks and methods of their management]. Tekhnika, enerhetyka, transport APK – Engineering, energy, transport of agro-industrial complex, 4 (96), 133-136 [In Ukrainian].
[4]    Yatsun, M. A. & Yatsun, A. M. (2010). Ekspluatatsiia ta diahnostuvannia elektrychnykh mashyn i aparativ: Navchalnyi posibnyk [Exploitation and diagnostics of electrical machines and devices: Tutorial]. Lviv: Lviv Polytechnic, 228 [In Ukrainian].
[5]    Matviichuk, V. A., Rubanenko, O. Ie., & Rubanenko, O. O. (2015). Vyznachennia yakosti funktsionuvannia dilianky iz znyzhenym oporom izoliatsii merezhi operatyvnoho postiinoho strumu za dopomohoiu neironechitkoho modeliuvannia [Determination of the quality of functioning of the site with reduced insulation resistance of the operational DC network using neurofuzzy modeling]. Visnyk Khmelnytskoho natsionalnoho universytetu. Seriia: Tekhnichni nauky – Bulletin of Khmelnytsky National University. Series: Technical Sciences, 3, 187-195 [In Ukrainian].
[6]    Matusevich O. O. (2015). Udoskonalennia metodolohii system tekhnichnoho obsluhovuvannia i remontu tiahovykh pidstantsii: Monohrafiia [Improving the methodology of maintenance and repair systems of traction substations: Monograph]. Dnepropetrovsk: Dnipropetrovsk national un-ty of railway transport after acad. V. Lazaryan, 295 [In Ukrainian].
[7]    Normy vyprobuvannia elektroobladnannia. Standart orhanizatsii Ukrainy [Standards for testing electrical equipment. Standard of organization of Ukraine]. (2020). SOU-N EE 20.302: 2007 from 6th April 2020. Kyiv: Ministry of Energy and Environmental Protection of Ukraine [In Ukrainian].
[8]    Khutoretsky, G. M., Tokov, M. I. & Tolvinskaya E. V. (1987) Proektyrovanye turboheneratorov [Turbine generator design]. Leningrad: Energoatomizdat, 256 [In Russian].
[9]    Voldek, A. I. (1974). Elektrycheskye mashyny [Electric machines]. Leningrad: Energy, 840 [In Russian].
[10]    Golodnova, O. S. (2005). Osnovnye prichiny otkazov turboheneratorov i puti ih preduprezhdenyia [The main causes of turbo generator failures and ways to prevent them]. Moscow: IPK-civil services, 93 [In Russian].
[11]    Kutin, V. M. & Shpachuk, O. O. Udoskonalennia zasobiv zakhystu vid odnofaznykh zamykan na zemliu v obmottsi statora synkhronnoho heneratora [Improvement of protection devices against single-phase earth faults in the stator winding of a synchronous generator]. Problemy avariinosti ta diahnostyka v elektromekhanichnykh systemakh ta elektrychnykh mashynakh – Accident problems and diagnostics in electromechanical systems and electric machines, 2/2013(22), 72-80 [In Ukrainian].
[12]    Hraniak, V. F. & Kukharchuk, V. V. Termichnyi metod ta zasib kontroliu stanu mizhvytkovoi izoliatsii obmotok zbudzhennia hidroahrehativ [Thermal method and device of monitoring the state of interturn insulation of excitation windings of hydro units]. Visnyk inzhenernoi akademii Ukrainy – Bulletin of the Engineering Academy of Ukraine, 2, 110-115 [In Ukrainian].