MODEL OF OPTIMIZATION OF FUNCTIONING OF MODERN POLYGRAPHIC AND PUBLISHING COMPLEXES
Sevostyanov Ivan – Doctor of Technical Sciences, Full Professor of the Department of “Technological Processes and Equipment of Processing and Food Productions” of Vinnytsia National Agrarian University (3 Solnechnaya St, Vinnytsia, 21008, Ukraine, e-mail: firstname.lastname@example.org).
Pidlypna Maryna – Post-Graduate Student of Vinnytsia National Agrarian University (3, Solnychna str., Vinnytsia, Ukraine, 21008, e-mail: email@example.com).
Analysis of known methods and modern equipment for printing and publishing (sheet rotary machines, roll machines, flat-printing and platen machines for flat impression block, relief, intaglio and digital printing) is conducted in this article. In a result of the analysis article authors have to make a conclusion, that most prospective equipment for automated printing and publishing complexes are: high-performance sheet and roll machines, in that number crucible, flatbed and rotary three-cylinder machines and also single-layer and multi-layer sectional machines, digital laser and inkjet machines. Authors propose a mathematical model of an automated optimization system of functioning of modern printing and publishing companies. In the model are used databases with information about orders (quantity, volumes, content, terms of orders fulfillment, admissible prime value and characteristics of quality of finished products), production capacities of printing and publishing enterprises of the region (destination, quantity and productivity of equipment, its technological capabilities, loading with other orders, service life), as well as additional data about value of transportation and storage of ready products, the possibility and feasibility of transferring orders to other enterprises and more. The elaborated model can be used as a basis for creation of a computer program for automated synthesis and analysis of functioning optimization of modern printing and publishing companies in the region to improve their efficiency, as well as for help customers of printing products in selection of optimal variants of orders fulfillment. The modeling results will allow to rationalize the utilization of enterprises capacity, to reduce the value of finished products, to ensure their proper quality, to avoid of disruptions during of peak periods of enterprises loading, to reduce the value of repair and maintenance of the complex equipment.
 Drozdov, V. N. (2005). Avtomatizacija tehnologicheskih processov v poligrafii [Automation of technological processes in polygraphy]. Saint Petersburg. : Petersburg institut pechati [in Russian].
 Efremov, N. F. Grotov, A. S., Efremov, D. N. (2008). Avtomatizirovannoe proektirovanie upakovki [Automated packing projection. Textbook]. Moskow: Universitetskaja kniga, Logos [in Russian].
 Ankuda, D. A. (2012). Poligraficheskie mashiny, avtomaty i potochnye linii : kurs lekcij dlja studentov special'nostej 1-40 01 02-03 «Informacionnye sistemy i tehnologii (izdatel'sko-poligraficheskij kompleks)», 1-47 01 02 «Tehnologija poligraficheskih proizvodstv» [Printing machines, automatic machines and conveyers: course of lectures for students of specialities 1-40 01 02-03 “Information systems and technologies (publishing and printing complexes”, 1-47 01 02 “Technology of printing productions”] Minsk : BGTU [in Russian].
 Shipinskij, V. G. (2012). Pechat' i dekorirovanie upakovki: Kurs lekcij dlja studentov special'nosti I-36 20 02 «Upakovochnoe proizvodstvo» [Printing and decoration of packing. Course of lectures for students of speciality I-36 20 02 “Packing production”]. Gomel': GGTU im. P.O. Suhogo [in Russian].
 Sevostianov, I. Kravets, S., Pidlypna, M. (2020). Use of criterial synthesis and analysis for modernization of objects of machine building production. Tehnіka, energetika, transport APС. 2 (109), 88–96.
 GOST 4.482 – 87. Sistema pokazatelej kachestva produkcii (SPKP). Izdanija knizhnye i zhurnal'nye. Izdatel'sko-poligraficheskoe oformlenie i poligraficheskoe ispolnenie. Nomenklatura pokazatelej [Product quality index system (SPKP). Book and magazine editions. Publishing and printing design and printing performance. Nomenclature of indicators] [in Russian].
 Sevostianov, І. V. (2006). Ekspluatacіja ta obslugovuvannja mashin. Navchal'nij posіbnik [Operation and maintenance of machines. Textbook]. Vіnnicja: VNTU [in Ukrainian].
 Sevostianov, І. V. (2015). Racіonal'na poslіdovnіst' proektuvannja tehnologіchnih procesіv skladannja [Rational consecution of projection of assembly technological processes]. Naukovі pracі Vіnnic'kogo nacіonal'nogo tehnіchnogo unіversitetu, 1, 1–5. [in Ukrainian].
 Sevostianov, І. V. (2018). Avtomatizacіja proektuvannja tehnologіchnih procesіv mehanіchnoї obrobki ta skladannja [Automation of projection of technological processes of mechanical processing and assembly]. Vіsnik mashinobuduvannja ta transport, 1 (7), 112 – 120. [in Ukrainian].
131 - Applied Mechanics
132 - Materials Science
133 - Industry engineering
141 - Power engineering, electrical engineering and electromechanics
208 - Agricultural engineering
The magazine "Engineering, Energy, Transport AIC" is included in the list of scientific professional editions of Ukraine on technical sciences
(Category "Б", Order of the Ministry of Education and Science of Ukraine dated 02.07.2020 №886)
Certificate of state registration of mass media: No. 21906-11806 P dated 03/12/2016.
Founder of the journal: Vinnytsia National Agrarian University
Editor-in-chief: Tokarchuk Olexiy A.
Ph.D., Assoc., VNAU (Vinnytsia)
Deputy Editor-in-Chief: Veselovska Nataliia R.
Doctor of Technical Sciences, Full Prof., VNAU (Vinnytsia)
Executive Secretary: Polevoda Yuri A.
Ph.D., Assoc., VNAU (Vinnytsia)
Members of the Editorial Board:
Tokarchuk O.A. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Veselovska N.R. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Agrarian University
Bulgakov V.M. - Doctor of Technical Sciences, Full Professor, Acad. NAAS, National University of Life and Environmental Sciences of Ukraine
Iskovich-Lototsky R.D. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Technical University
Bandura V. N. - Ph.D., Full professor, Vinnytsia National Agrarian University
Polevoda Yu.A. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Tsurkan A.V. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Ivanchuk Y.V. - Ph.D., Associate Professor, Vinnytsia National Technical University
Jordan Todorov Maximov - Doctor of Technical Sciences, Full Professor, Technical University of Gabrovo (Bulgaria)
Type of publication: journal
Kind of publication: scientific
Publication status: domestic
Year of foundation: 1997
Periodicity: 4 times per year
Volume: 18-20 conv. print. sheet (А4)
ISSN: 2520-6168 (print version), (online version)
Language of publication: (mixed languages) Ukrainian, Russian, English
The sphere of distribution and category of readers: national, foreign, faculty, scientists, entrepreneurs.
The periodical edition is included to the List of scientific professional publications of Ukraine on technical sciences, approved by order of the Ministry of Education and Science of Ukraine in 05.16.2016, No. 515.
The journal "Engineering, Energy, Transport AIC" is included in the "Catalog of Ukrainian Publications".
Subscription to the journal can be issued in each post office. The subscription index is 99720.
It was founded in 1997 under the title "Bulletin of the Vinnitsa State Agricultural Institute." According to the Decree of the Presidium of the Higher Attestation Commission of Ukraine of September 11, 1997, this publication received the status of a professional in which it is allowed to publish the main results of dissertation researches.
In 2001-2014 the journal published under the title “Collection of scientific works of Vinnytsia National Agrarian University. Series: Technical Sciences "(Certificate of State Registration of Mass Media KV No. 16644-5116 PR of 04/30/2010).
Since 2015 journal has title "Engineering, Energy, Transport AIC" (Certificate of State Registration of Mass Media No. 21906-11806 P dated 03/12/2016).