Issue №: 1(112)
The journal solves the problems of creation and improvement of machinery and technologies for agriculture: 131 - Applied Mechanics, 132 - Materials Science, 133 - Industrial Engineering, 141 - Power Engineering, Electrical Engineering and Electromechanics, 208 - Agricultural Engineering.
MODELING OF DEGRADATION PROCESSES OF A HOMOGENEOUS SYSTEM
Igor Zozulyak – PhD, senior teacher of the Department of "Technological Processes and Equipment of Processing and Food Productions "of the Vinnytsia National Agrarian University (3 Solnechnaya St., Vinnitsa, 21008, Ukraine, email: zozulak@vsau.vin.ua, https://orcid.org/0000-0002-5381-3115 ).
Currently, the food industry of our country faces the task of increasing production, obtaining high quality products and preserving them. The solution of these problems is possible through the use of innovative technologies and equipment. The problem of food preservation and obtaining high nutritional value can be solved by developing the latest technologies for processing and drying of bulk agricultural raw materials used for human consumption.
The implementation of innovative technologies is determined by the use of new elements and equipment. Analysis of the development of technologies used for drying agricultural raw materials has shown that plants that operate on the principle of converting electrical energy into energy of infrared radiation have significant advantages and a wide range of uses.
The technology of infrared drying of wet products allows to use almost 100% of the energy supplied to the product and significantly reduce the duration of processing and drying. This technology is highly effective at a temperature of 40 ... 60 ° C. With such drying, the product is stored as much as possible, cell membranes are not destroyed, vitamins are stored. At the same time, infrared radiation, which has a sterilizing effect, makes these products suitable for long-term storage.
The analysis of literature sources is carried out in the work and the necessity and possibility of creation of new designs of dryers with use of infrared influence on a product and vibration fluctuations of the working container for intensification of drying process is substantiated.
The proposed calculations to determine both the time of the product in the processing chamber and the height of the layer will allow to develop an adaptive control scheme for the drying process in the fluidized bed, in devices with infrared heat supply and thus affect the quality of dried products.
[1] Bernik, P. S., Palamarchuk, I. P., Zozulyak, I. A. (1998). Analiz konstrukczij vibraczionnykh sushilok dlya sypuchej selskokhozyajstvennoj produkczii [Analysis of the design of vibratory dryers for bulk agricultural products]. Vibraczii v tekhnike i tekhnologiyakh. Vinniczya, 2(6), 14–21. [in Russian].
[2] Bernik, P. S., Deni`sov, P. D., Zozulyak, I. A. (2000). Vibraczijni lotkovi susharki [Vibrating tray dryers]. Vibraczii v tekhnike i tekhnologiyakh. Vinniczya, 1(13), 32–33. [in Ukrainian]
[3] Burdo, O. Bandura, V., Zykov, A., Zozulyak, I., Levtrinskaya, J., Marenchenko, E. (2017). Using of the wave technologies in intensification processes of heat and mass transfer. EUREKA: Physics and Engineering. Issue 4. P. 18–24. doi: 10.21303/2461-4262.2017.00399. [in English]
[4] Palamarchuk, I. P., Bernik, P. S., Steczko, Z. A., Yaskov, V. V., Zozulyak, I. A. (2004). Mekhanichni proczesi ta obladnannya pererobnogo ta kharchovogo virobnicztva [Mechanical processes and equipment of processing and food production]. Tom 1. Navchalnij posibnik. Lviv: Vidavnicztvo NU «Lvivska politekhnika». [in Ukrainian]
[5] Burdo, O. G., Terziev, S. G., Bandura, V. N. (2015). Princzipy napravlennogo energeticheskogo dejstviya v pishhevykh nanotekhnologiyakh. Problemy regionalnoj energetiki, 1(27), 79–85. [in Russian].
[6] Paziuk, V. M., Liubin, M. V., Yaropud, V. M., Tokarchuk, O. A., Tokarchuk, D. M. Research on the rational regimes of wheat seeds drying. INMATEH-Agricultural Engineering, 2018. 56(3), 39–48. [in English]
[7] Paziuk, V. M., Petrova, Z.O., Tokarchuk, O.A., Yaropud, V.M.Research of rational modes of drying rape seed INMATEH-Agricultural Engineering, 2019. 58(2), с. 303-310. [in English].
[8] Burdo, O.G., Bandura, V.N., Levtrinskaya, Yu. O. (2018). Electrotechnologies of targeted energy delivery in the processing of food raw materials. Surface Engineering and Applied Electrochemistry. Vol. 54, 2, 210–218 [in English].
[9] Sevostianov, I. V., Zozuliak, I. A. (2020). Tekhnolohichne obladnannia tsekhiv pererobky produktsii tvarynnytstva [Technological equipment of livestock processing shops. Tutorial]. Navchalnyi posibnyk. Vinn. nats. ahrar. un-t. Vinnytsia : VNAU. [in Ukrainian]
[10] Zozuliak, I.A. (2020). Obgruntuvannia konstruktsiino-tekhnolohichnykh parametriv infrachervonoi vibratsiinoi susharky [Substantiation of design and technological parameters of infrared vibration dryer]. Tekhnika, enerhetyka ta transport APK, 1(108). 75–81. [in Ukrainian]
About the journal
G8 – Materials Science
G9 – Applied Mechanics
G10 – Metallurgy
G11 – Mechanical Engineering (by specializations)
The journal "Engineering, Energy, Transport AIC" is indexed according to the following databases and catalogs:
The All-Ukrainian scientific journal “Technology, energy, agriculture transport AIC” is an open-access scientific publication that publishes the results of original research, theoretical and applied developments, as well as scientific papers in the fields of engineering sciences, energy systems, and transport technologies of the agro-industrial complex.
The main objective of the scientific journal “Technology, energy, agriculture transport AIC” is to disseminate the results of modern scientific research and to promote the development of technical, energy, and transport solutions for the agro-industrial complex through the publication of scientific materials characterized by scientific novelty and practical significance in the field of design and modernization of machinery, equipment, and technologies.
The journal’s activities are focused on supporting the development of engineering science, stimulating the implementation of innovative approaches into industrial practice, as well as ensuring effective exchange of scientific achievements among researchers, educators, engineers, and other specialists in relevant fields.
Objectives of the Journal
To achieve its defined objective, the journal ensures the implementation of the following key tasks:
· publication of the results of fundamental and applied research covering the fields of applied mechanics, mechanical engineering, materials science, energy systems, electrical engineering, electromechanics, and transport systems of the agro-industrial sector;
· promotion of the implementation of advanced technical and technological developments aimed at improving the efficiency of machinery, equipment, and production processes;
· creation of conditions for active scientific exchange among research institutions, higher education institutions, industrial enterprises, and other interested organizations;
· support for the development of interdisciplinary research and expansion of cooperation among specialists in various fields of science and technology;
· promotion of the improvement of the scientific and technical level of research related to the design, modernization, and operation of technical equipment used in agro-industrial production;
· dissemination of information on modern achievements in science and technology and the implementation of innovative technologies in the fields of technical support, energy, and transport;
· development of a scientific information environment that facilitates effective scientific communication and the integration of national research into the international scientific community.
Publication frequency: 4 issues per year
Languages of publication: Ukrainian, English
Editor-in-Chief: Vitalii YAROPUD
State Registration: Decision of the National Council of Ukraine on Television and Radio Broadcasting № 1337 and № 1180. Media Identifier: R30-05173
EDRPOU Code: 00497236
Publisher ROR: https://ror.org/05m3ysc06
Publisher DOI Prefix: 10.37128
Technology, energy, agriculture transport AIC is a scholarly professional journal with a long-standing history and stable academic tradition, reflecting the evolution of engineering and technical sciences within the agro-industrial sector of Ukraine.
The journal was founded in 1997 under the title Bulletin of Vinnytsia State Agricultural Institute. According to the Resolution of the Presidium of the Higher Attestation Commission of Ukraine dated September 11, 1997, the publication obtained the status of a professional scientific journal, which enabled the publication of the main results of doctoral and candidate dissertations in technical sciences. From its inception, the journal positioned itself as an academic platform for addressing current issues of mechanization, electrification, and technical support of agricultural production. During 2001–2014, the journal was published under the title Proceedings of Vinnytsia National Agrarian University. Series: Technical Sciences (State Registration Certificate of Print Media KV No. 16644-5116 PR dated April 30, 2010). Throughout this period, a systematic approach to the selection and peer review of scientific manuscripts was established, the thematic scope of publications was expanded, and continuity of scientific directions as well as the development of sectoral engineering schools was ensured. Since 2015, the journal has been published under its current title, Technology, energy, agriculture transport AIC (State Registration Certificate No. 21906-11806 R dated March 12, 2016). The change of title reflected the expansion of the journal’s thematic coverage and its orientation toward interdisciplinary research in mechanical engineering, energy systems, electrical engineering, transport technologies, automation, and digital solutions for the agro-industrial complex.
