Engineering, Energy, Transport AIC

Vidmysh Andriy - Candidate of Technical Sciences, Associate Professor of the Department of Power Engineering, Electrical Engineering and Electromechanics of the Vinnytsia National Agrarian University (3, Solnyschna St., Vinnytsia, 21008, Ukraine, email: andrijvydmysh1966@gmail.com).
Voznyak Olexandr - Candidate of Technical Sciences, Associate Professor of the Department of Power Engineering, Electrical Engineering and Electromechanics of the Vinnytsia National Agrarian University (3, Solnyschna St., Vinnytsia, 21008, Ukraine, email: аlex.voz1966@gmail.com).

Described conditions of converter optimization for DC engine braking modes. Braking minimizes the level of current ripple when using various methods of current regulation.
Solving problems of efficient use of a DC traction engine and create safe modes of operation by ensuring optimal mode.
The introduction of additional elements in the scheme allows to reduce the rate of attenuation of the current in the brake coils.
A significant advantage of the proposed circuit modernization is the introduction of diodes in the circuit, which will allow the use of self-excitation of the electric motor for electrical braking.
The proposed solution simplifies the technical implementation and reduces costs due to the lack of an additional independent power source for the brake coils.
A significant factor in increasing the profitability of electric transport in general may be the replacement of an existing traction electric drive (TEP) with their more modern types.
Simulation models have been developed to allow the study of electromechanical processes in a serial DC engine.
Introduction to the circuit of a pulsed regulator diode, which shunts the excitation winding, reduces the rate of attenuation of the current in this winding.
The proposed modernization of the circuit is to introduce into the circuit the diodes, an energy storage, which allows the use of brake modes for self-excitation of the motor and to avoid the use of additional independent sources of current.

[1]    Burlaka, V. V., Hulakov, S. V., Podnebenna, S. K. (2019). Udoskonalennia skhemnykh rishennia chastotno-rehulovanoho elektropryvoda. Universytetska nauka : tezy dop. Mizhnar. naukovo-tekhn. konf., (pp. 247–248). Mariupol. [in Ukrainian].
[2]    Bruskin, D. Z., Zorokhovich, A. E., Khvostov, V. S. (1990). E`lektricheskie mashiny` i mikromashiny` (3th ed). M.: Vy`ssh. shk. [in Russia].
[3]    Vydmysh, A. A., Troshyn, O. I. (2003). Teoriia elektropryvoda. Vinnytsia: UNIVERSUM. [in Ukrainian].
[4]    Herman-Halkyn, S. H. (2002). Sylovaia эlektronyka: Laboratornye raboty na PK. M.: Uchitel` i uchenik.  [in Russia].
[5]    Herman-Halkyn, S. H., Kardonov, H. A. (2003). Elektrycheskye mashyny: Laboratornye raboty na PK. SPb.: KORONA print [in Russia].
[6]    Herman-Halkyn S. H. (2001). Kompiuternoe modelyrovanye poluprovodnykovykh system v MATLAB 6.0. SPb.: KORONA print. [in Russia].
[7]    Hlazenko, T. A. (1973). Poluprovodnykovye preobrazovately v elektropryvodakh postoiannoho toka. Leningrad : E`nergiya. [in Russia].
[8]    Holts, M. E., Hudzenko, A. B., Ostrerov, V. M. (1986). Bystrodeistvuiushchye elektropryvody postoiannoho toka s shyrotno-ympulsnymy preobrazovateliamy. Moskva : E`nergoatomizdat. [in Russia].
[9]    Andryenko, P. D., Kaplyenko, A. O.,. Shylo, S. Y, Nemudryi, Y. Yu. (2007). Yssledovanye rezhymov tormozhenyia v systeme ympulsnoho rehulyrovanyia seryesnoho elektrodvyhatelia. Electrical Engineering and Power Engineering, 2, 11-14. [in Russia].
[10]    Metelskyi, V. P. (2005). Elektrychni mashyny ta mikromashyny. Zaporizhzhia : ZNTU. [in Ukrainian].
[11]    Mokin, B. I., Mokin, V. B., Mokin, O. B. (2010). Matematychni metody identyfikatsii dynamichnykh system. VNTU : Vi`nniczya [in Ukrainian].
[12]    Pehov, D. V., Burtsev, P. V., Andreev, V. E. (2003). Rukovodstvo po ustroistvu elektropoezdov ЭT2, ЭR2T, ЭD2T, ЭT2M. Moscow. Center for Commercial Development. [in Russia].
[13]    Perlmuter, V. M., Sydorenko, V. A. (1988). Systemy upravlenyia tyrystornymy elektropryvodamy postoiannoho toka. M.: E`nergoatomizdat. [in Russia].
[14]    Dryuchin, O. O. (2002). Sposib halmuvannia dvyhuna postiinoho strumu ta prystrii dlia yoho realizatsiipat 47111A MKI N02 RZ/08; Ukrainian. [in Ukrainian].
[15]    Borodij, V. A., Nesterova, O. Yu. (2018). Kompensaciya rizko-zminnogo strumu yakorya potuzhnih sinhronnih privodiv zasobami avtomatichnoyi sistemi zbudzhennya iz nestandartnim algoritmom keruvannya. Naukovij zhurnal, 1, 72–80. [in Ukrainian].
[16]    Vydmysh, A. A., Babii, S. M., Petrus, V. V. (2012). Teoriia elektropryvoda. Samostiina ta indyvidualna robota studentiv. Vinnytsia: VNTU. [in Ukrainian].
[17]    Kazachkovskij, N. N. (2018). Sopostavlenie zakonov chastotnogo upravleniya na primere preobrazovatelya chastoty ALTIVAR 21. Girnicha elektromehanika ta avtomatika, 100, 69–72. [in Russia].
[18]    Aspalli, M., Asha, R., Hunagund, P. (2012). Three phase induction motor drive using IGBTs and constant V/F method. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering. 1. 463–469. . [in English].
[19]    Bondar, R. P., Podoltsev, A. D. (2017). Complex model with frequency dependent parameters for electrodynamic shaker characteristics. Technical electrodynamics, 1, 44–51. doi: 10.15407/techned2017.01.044. [in English].