Engineering, Energy, Transport AIC

Nataliia Veselovska – Doctor of Technical Sciences, Professor, Head of the Department of Machines and Equipment of Agricultural Production of Vinnytsia National Agrarian University (3 Soniachna St., Vinnytsia, Ukraine, 21008, e-mail: wnatalia@gmail.com, https://orcid.org/0000-0001-9399-6721).
Oleg Gaidamak – Candidate of Technical Sciences, Associate Professor of the Department of Electric Power, Electrical Engineering and Electromechanics of Vinnytsia National Agrarian University (3 Soniachna str., Vinnytsia, 21008, Ukraine, e-mail: gaidamak@vsau.vin.ua).
Mykhailo Karpiichuk – Postgraduate Student of the Department of Electric Power, Electrical Engineering and Electromechanics of Vinnytsia National Agrarian University (3 Soniachna str., Vinnytsia, 21008, Ukraine, e-mail: ashenvale228@gmail.com, https://orcid.org/0000-0003-3958-4755 ).
Jylia Kucherenko – Postgraduate Student of the Department of Electric Power, Electrical Engineering and Electromechanics  of Vinnytsia National Agrarian University (3 Soniachna str., Vinnytsia, 21008, Ukraine, e-mail: fortyna1910@gmail.com, https://orcid.org/0000-0003-3406-9850).

The article is devoted to the technology of cold gas-dynamic spraying - a relatively new technology for creating functional coatings in which narrowed-expanding nozzles (De Laval nozzles) are used, in which solid powders are sprayed at or close to supersonic speed in the direction of the substrate, where they plastically deform and adhere.
Cold gas dynamic spraying is an innovative process that has received widespread scientific interest and industrial applications in the automotive, aerospace and biotechnology industries in recent years. Spraying various powder materials in this way provides protection against corrosion and can increase the mechanical strength and wear resistance of details. With that method it is possible to create functional coatings with different thermal conductivities and electrical conductivities, which can be used as insulation materials, conducting and isolation surface layers of parts, coatings for controlling gaps, restoring and repairing details.
The article discusses modern developments in the field of experimental analysis of technologies and processes of cold gas-dynamic spraying, the systems of cold gas-dynamic spraying and coating formation are determined and the parameters and principles of the process are described. The installation for spraying surfaces developed at VNAU is presented and researches and the analysis of possibility of use of a method of a cold gas-dynamic spraying for restoration of details of autotractor equipment of agricultural purpose are carried out.

[1]    Villafuerte, J. (2010) Current and future applications of cold spraying technology. Met. Finish. 108. 37–39. [in English]
[2]    Gaidamak, O.L., Matviichuk, V.A., Kucherenko, Y.S. (2020). Perspectyvy stvorennia polimernyh funcionalnyh pokryttiv iz zastosuvannyam gazodynamichnogo napylennia. Technika, energetyka, transport APC. 2(109). 2020. 105–112. [In Ukrainian].
[3]    Shorinov, A.V., Volkov, A.O., Markovich, S.E. (2018). Holodnoe gazodinamicheskoe napilenie metallicheskih pokrytiy na kompozaitsionnie materialy i plastiki: literaturniy obzor. Vestnik HNADU, 81. 62–73. [In Russian].
[4]    Tinashe, S.E. (2010). Conceptual Design of a Low Pressure Cold Gas Dynamic Spray (LPCGDS) System. University of the Witwatersrand Paper. 12–17. [in English].
[5]    Han, Y.K., Birbilis, N., Spencer, K., Zhang, M., Muddle, B.C. (2010). Investigation of Cu coatings deposited by kinetic metallization, Mater. Charact. 61. 1167–1186. [in English].
[6]    Robitaille, F., Yandouzi, M., Hind, S., Jodoin, B. (2009). Metallic coating of aerospace carbon/epoxy composites by the pulsed gas dynamic spraying process. Surf Coatings Technol, 203. 2954–2960. [in English]
[7]    Hanft, D., Glosse, P., Denneler, S., Berthold, T., Oomen, M. (2018). The aerosol deposition method: a modified aerosol generation unit to improve coating quality. Material (Basel), 11. 1–11. [in English]
[8]    Ganesan, A., Yamada, M., Fukumoto, M. (2013). Cold spraying coating deposition mechanism on the thermoplastic and thermosetting polymer substrates. J. Therm. Spray Technol. 22. 1275–1282. [in English]
[9]    Yin, S., Suo, X., Liao, H., Guo, Z., Wang, X. (2014). Significant influence of carrier gas temperature during the cold spraying processes. Surf. Eng. 30. 443–450. [in English]
[10]    Gaydamak, O.L., Savulyak, V.I. (2017). Issledovanie funcionalnyh pokritiy poluchennih gazodinamicheskim napyleniem i perspektivy yh primeneniya v kompyuternoy technike. Naukovi praci VNTU, 2. 1–7. [In Russian].
[11]    Yoon, S., Kim, H., Lee, C. (2007). Fabrication of automotive heat exchanger using kinetic spraying process. Surf. Coat. Technol, 201. 9524–9932. [in English]
[12]    Gaidamak, O. L (2016). Prustria dla gazodenamichtskoe нnanesenia pokritei radialnogo podachi materialy. [3. Pat. 110552 Ukraine, IPC C23C 24/00. Device for gas-dynamic coating with radial flow of powder material; applicant and patentee Haidamak O.L. No. 201405543; ] claimed 05/23/14; publ. 01/12/16, Bul. №1. [in Ukrainian].
[13]    Oyinbo, S.T., Jen, T-Ch. (2019). A comparative review on cold gas dynamic spraying processes and technologies. Manufacturing Rev, 6(25). 1–19. [in English].