Issue №: 3(114)
The journal solves the problems of creation and improvement of machinery and technologies for agriculture: 131 - Applied Mechanics, 132 - Materials Science, 133 - Industrial Engineering, 141 - Power Engineering, Electrical Engineering and Electromechanics, 208 - Agricultural Engineering.
RATIONALE PARAMETERS SOIL TILLING MACHINE FOR STRIP-TILL TECHNOLOGY
Leonid Sereda – Ph.D. of Eng., Professor of the Department of Agroengineering and technical service, Vinnytsia National Agrarian University (3, Sunny St., Vinnytsia, 21008, Ukraine, +380674726202, e-mail: leonidsereda@vsau.vin.ua, https://orcid.org/0000-0003-0866-2503 ).
Kovalchuk Dmytro – Undergraduate student majoring in 208 “Agroengineering” Faculty of Engineering and Technology of Vinnytsia National Agrarian University (3, Sonychna St., Vinnytsia, 21008, Ukraine, +380937622253, e-mail: dimasikkovalchyk2008@gmail.com).
The agro-industrial complex of Ukraine is a branch of the national economy designed to ensure the production of sufficient food for the population at high quality. The dynamic growth of the country's population leads to an increase in the gradual need for food, thus the agro-industrial complex will be a relevant industry for a long time, one of the key areas of economic development.
The basis of agricultural production is agriculture, the main subject of which is land. Today, agriculture in the country is experiencing a very serious problem associated with the rapid decline in potential soil fertility. Effective development of agriculture in Ukraine does not do without the introduction of innovations in agriculture. Namely, the introduction of rational technologies with minimization of tillage and new design solutions for tillage units, focused on preserving and increasing the potential fertility of the country's lands, which is the key to a highly efficient process of crop production.
Industrial tillage technology The impact on the soil, in addition, the violation of the technology of fertilizers, both organic and mineral, leads to a high level of plowing, deterioration of soil structure and reduced humus content, so research aimed at finding alternative, modern technologies tillage, which will preserve and restore the potential fertility of soils, which determines the relevance of this article.
Thus, in order to preserve the main indicator of soil fertility of Ukraine, the authors of the article conducted theoretical studies of the parameters of the tillage unit for tillage technologies Strip-till, preceding the design and design, the main results of which are presented in the article.
[1] Voytyuk, D.G. (1994). Agricultural machinery. Kyiv: Vintage. [in Ukrainian].
[2] Drozdov, V.N., Kuznetsov, Y.I., Zaitsev, M.V (1988). Tillage with combined machines and units. M.: Rosagropromizdat. [in Ukrainian].
[3] Karpenko, A.N., Khalansky, V.M. (1989). Agricultural machinery. 6 ed., Reworked. and ext. M.: Agropromizdat. [in Rassian].
[4] Klenin, N.I., Sakun, V.A. (1980). Agricultural and reclamation machines: elements of the theory of working processes, calculation of control parameters and modes of operation. 2nd ed., Revised. and ext. [in Russian].
[5] Kozishkurt, S.M., Savchuk, N.V. (2017). The main reasons for the deterioration of soil and ecological conditions of lands. Irrigated agriculture: present, problems, prospects, DDAEU. 104–106. [in Ukrainian].
[6] Krachok, L.I. (2013). New technologies in agriculture: problems and prospects for implementation / L.I. Krachok. Sustainable economic development. International research and production journal. №3. [in Ukrainian].
[7] On preservation and reproduction of soil fertility. Information and analytical materials of NAAS of Ukraine on scientific substantiation of measures for preservation and reproduction of soil fertility, September 2018. [in Ukrainian].
[8] Sereda, L.P. (2017). Strip-till technology in crop production. Prospects for implementation in Ukraine. Irrigation Agriculture, DSAEU. 104-107. [in Ukrainian].
[9] Sereda, L.P., Kupchuk, I.M., Kovalchuk, D.A., Zamriy, M.A. (2021). Development of a device for milling tillage with simultaneous application of fertilizers, Zbirnyk naukovykh prats VNAU. Seriia: Engineering, energy, transport in agriculture, Vinnytsia. 152-161. [in Ukrainian].
[10] Sereda, L. P, Trukhanska, O. O, Shvets, L. V. (2019). Development and research of a soil-tillage machine for strip-till technology with active milling working bodies. All-Ukrainian Journal of Vibration in Engineering and Technology Vinnitsa, VNAU, Issue 4 (95). 79–86. [in Ukrainian].
[11] Sereda, L.P., Kovalchuk, D.A. (2021). Development of a combined tillage device for resource-saving tillage technologies, Proceedings of the VIII All-Ukrainian scientific-practical conference "Innovative technologies in agriculture". Lutsk, May 20-21. 116–118. [in Ukrainian].
[12] Tishchenko, S.S., Dubrovin, V.O., Teslyuk, V.V., Volyansky, M.S. (2014). Agricultural machinery. Theory and calculation of working bodies of machines for surface tillage: textbook. way. Kyiv.: Agrarian Media Group Company. [in Ukrainian].
About the journal
G8 – Materials Science
G9 – Applied Mechanics
G10 – Metallurgy
G11 – Mechanical Engineering (by specializations)
The journal "Engineering, Energy, Transport AIC" is indexed according to the following databases and catalogs:
The All-Ukrainian scientific journal “Technology, energy, agriculture transport AIC” is an open-access scientific publication that publishes the results of original research, theoretical and applied developments, as well as scientific papers in the fields of engineering sciences, energy systems, and transport technologies of the agro-industrial complex.
The main objective of the scientific journal “Technology, energy, agriculture transport AIC” is to disseminate the results of modern scientific research and to promote the development of technical, energy, and transport solutions for the agro-industrial complex through the publication of scientific materials characterized by scientific novelty and practical significance in the field of design and modernization of machinery, equipment, and technologies.
The journal’s activities are focused on supporting the development of engineering science, stimulating the implementation of innovative approaches into industrial practice, as well as ensuring effective exchange of scientific achievements among researchers, educators, engineers, and other specialists in relevant fields.
Objectives of the Journal
To achieve its defined objective, the journal ensures the implementation of the following key tasks:
· publication of the results of fundamental and applied research covering the fields of applied mechanics, mechanical engineering, materials science, energy systems, electrical engineering, electromechanics, and transport systems of the agro-industrial sector;
· promotion of the implementation of advanced technical and technological developments aimed at improving the efficiency of machinery, equipment, and production processes;
· creation of conditions for active scientific exchange among research institutions, higher education institutions, industrial enterprises, and other interested organizations;
· support for the development of interdisciplinary research and expansion of cooperation among specialists in various fields of science and technology;
· promotion of the improvement of the scientific and technical level of research related to the design, modernization, and operation of technical equipment used in agro-industrial production;
· dissemination of information on modern achievements in science and technology and the implementation of innovative technologies in the fields of technical support, energy, and transport;
· development of a scientific information environment that facilitates effective scientific communication and the integration of national research into the international scientific community.
Publication frequency: 4 issues per year
Languages of publication: Ukrainian, English
Editor-in-Chief: Vitalii YAROPUD
State Registration: Decision of the National Council of Ukraine on Television and Radio Broadcasting № 1337 and № 1180. Media Identifier: R30-05173
EDRPOU Code: 00497236
Publisher ROR: https://ror.org/05m3ysc06
Publisher DOI Prefix: 10.37128
Technology, energy, agriculture transport AIC is a scholarly professional journal with a long-standing history and stable academic tradition, reflecting the evolution of engineering and technical sciences within the agro-industrial sector of Ukraine.
The journal was founded in 1997 under the title Bulletin of Vinnytsia State Agricultural Institute. According to the Resolution of the Presidium of the Higher Attestation Commission of Ukraine dated September 11, 1997, the publication obtained the status of a professional scientific journal, which enabled the publication of the main results of doctoral and candidate dissertations in technical sciences. From its inception, the journal positioned itself as an academic platform for addressing current issues of mechanization, electrification, and technical support of agricultural production. During 2001–2014, the journal was published under the title Proceedings of Vinnytsia National Agrarian University. Series: Technical Sciences (State Registration Certificate of Print Media KV No. 16644-5116 PR dated April 30, 2010). Throughout this period, a systematic approach to the selection and peer review of scientific manuscripts was established, the thematic scope of publications was expanded, and continuity of scientific directions as well as the development of sectoral engineering schools was ensured. Since 2015, the journal has been published under its current title, Technology, energy, agriculture transport AIC (State Registration Certificate No. 21906-11806 R dated March 12, 2016). The change of title reflected the expansion of the journal’s thematic coverage and its orientation toward interdisciplinary research in mechanical engineering, energy systems, electrical engineering, transport technologies, automation, and digital solutions for the agro-industrial complex.
