Engineering, Energy, Transport AIC

Serhiy Shargorodskiy – Candidate of Technical Sciences, Associate Professor of the Department «Machinery and Equipment of Agricultural Production» of the Vinnytsia National Agrarian University (3, Solnychna str., Vinnytsia, Ukraine, 21008, e-mail: sergey20@vsau.vin.ua, https://orcid.org/0000-0003-2125-773X).

Volodymyr Rutkevych – Candidate of Technical Sciences, Associate Professor of the Department «Machinery and Equipment of Agricultural Production» of the Vinnytsia National Agrarian University (Sonyachna Str., 3, Vinnytsia, Ukraine, 21008, e-mail: v_rut@ukr.net, https://orcid.org/0000-0002-6366-7772).

Vita Sharhorodska – teacher of  English and German. Separate structural subdivision of Technological and Industrial Vocational College of Vinnytsia National Agrarian University (Yunosty Avenue, 8, Vinnytsia, 21021, Ukraine, e-mail vitakomar@yahoo.com, https://orcid.org/0000-0003-1992-1355).

Today, the hydraulic drive is increasingly used in agricultural machinery as motion drives, drives of working bodies, and drives of control systems. The power source of this type of drives is pumping stations based on piston-type pumps. This type of pump units has a number of advantages and disadvantages compared to gear pumps. The advantages include power, reliability, higher efficiency, the ability to smoothly regulate the flow of working fluid, and the disadvantages include increased requirements for the degree of purification of working fluids.
The article reviews known hydraulic schemes of agricultural machines, analyzes them, and identifies their advantages and disadvantages. One of the elements of these hydraulic systems is the pump supply control system depending on the load on the working bodies of the hydraulic system elements. The correct choice of the parameters of the elements of this system has a significant impact on the quality of its work as a whole. In order to study the influence of system parameters, the structure and principle of operation of the system for regulating the supply of the working liquid of the axial-piston pump are described, the coordinates of the movement of the center of the reduced force from the action of the plunger pairs on the cradle of the control system for the supply of the working liquid are calculated. The trajectory of its movement along the plane of the feeding adjustment cradle is determined. The proposed dependencies make it possible to determine the magnitude of the moment acting on the cradle depending on the magnitude of the eccentricity. it was found that the point of application of the combined force to the end of the cradle moves along a loop-like trajectory, symmetrical to the axis, parallel to the axis of rotation of the cradle. At the same time, the magnitude of the moment of the combined force acting on the cradle has a cyclic nature, the periodicity of which is determined by the angle of rotation of the cylinder block by a value equal to the angular distance between adjacent cylinders. The frequency of fluctuations of the moment of the combined force when rotating the cylinder block of the PVC 1.63 pump with a frequency of 1500 rpm is 450 Hz, which requires the development of measures to eliminate their negative impact on the operation of the pump supply regulator.
The moment of combined forces acting on the cradle from the side of the cylinder block depends on the pressure in the pump discharge line and the angle of rotation of the cylinder block. At a nominal pressure of 25 MPa, the range of fluctuations of the combined force moment acting on the PVC 1.63 pump cradle reaches 290 Nm. If the axes of the cylinder block and the trunnion of the cradle are in the same plane, the moment of combined forces acting on the cradle will change symmetrically relative to the axis of rotation of the cradle and periodically cause it to deviate in opposite directions. This nature of the load of the cradle interferes with the process of adjusting the angle of its inclination and, accordingly, the working volume of the pump.
In order to reduce the negative impact of the moment of the combined force on the quality of the regulation of the supply of the working fluid of the PVC 1.63 pump, it is recommended to introduce a shift of the axis of rotation of the cradle relative to the axis of the cylinder block by 5 mm.

[1]    Gunko, I., Hraniak, V., Yaropud, V., Kupchuk, I., Rutkevych, V. (2021). Optical sensor of harmful air impurity concentration. Przegląd elektrotechniczny, 7 (97), 76–79. [in English].
[2]    Veselovska, N.R., Sharhorodskyi, S.A., Yashchuk, Ye.V. (2022). Eksperymentalne doslidzhennia roboty hidrostatychnoi transmisii typu HST-90 [Experimental study of the hydrostatic transmission of the GST-90 type] Tekhnika, enerhetyka, transport APK, 1 (111), 58–64. [in Ukrainian].
[3]    Rutkevych, V.S. Shapovaliuk, S.O. (2023). Analiz perekhidnykh protsesiv v adaptyvnomu hidravlichnomu pryvodi vyvantazhuvacha steblovykh kormiv [Analysis of transient processes in the adaptive hydraulic drive of the stem forage unloader]. Visnyk Khmelnytskoho natsionalnoho universytetu. Seriia: Tekhnichni nauky, 3 (321). 199–209. [in Ukrainian].
[4]    Ivanov, M.I., Hrechko, R.O. (2019). Doslidzhennia vplyvu ob`iemiv hidrolinii na robotu hidrostatychnoi transmisii typu HST90. Kompleksne zabezpechennia yakosti tekhnolohichnykh protsesiv ta system: materialy IX Mizhnarodnoi naukovo-praktychnoi konferentsii, 14-16 travnia 2019 roku. Chernihiv. 232–233. [in Ukrainian].
[5]    Rutkеvych, V.S. (2017). Аdaptyvnyi hіdrаvlіchnyi pryvоd blоchnо-pоrtsіinоhо vіdоkrеmliuvаchа kоnsеrvоvаnоhо kоrmu [Adaptive hydraulic drive block-portable of canned forage block-batch separator]. Tekhnika, enerhetyka, transport APK, 4 (99). 108–113. [in Ukrainian].
[6]    Sereda, L.P., Rutkevych, V.S., Ziniev, M.V. (2018). Doslidzhennia matematychnoi modeli hidropryvoda sehmentno-paltsevoho rizalnoho aparata kosarky [Study of the mathematical model of hydraulic drives segment-finger mower unit]. Tеkhnіkа, еnеrhеtykа, trаnspоrt АPK, 1 (100), 111–123. [in Ukrainian].
[7]    Shargorodskyi, S., Rutkevych, V. (2023). Development of the mathematical model of the volume hydrostatic transmission HST-112 in the braking mode  Vibratsii v tekhnitsi ta tekhnolohiiakh, 1 (108), 85–93. [In Ukrainian].
[8]    Shаrhоrоdskyi, S.А., Rutkevych, V.S.,  Yshchuk, Ye.V. (2022). Matematychne modeliuvannia hidropryvoda perevedennia shyrokozakhvatnoho silshospodarskoho ahrehatu iz transportnoho polozhennia u roboche [Mathematical modeling of the hydraulic drive of the transfer of the wide-grip agricultural unit from the transport position to the working position]. Vibratsii v tekhnitsi ta tekhnolohiiakh, 3 (106), 54–63. [In Ukrainian].
[9]    Ivanov, M.I., Rutkevych, V.S., Kolisnyk, O.M., Lisovoy, I.O. (2019). Research of the influence of the parameters of the block-portion separator on the adjustment range of speed of operating elements. INMATEH - Agricultural  Engineering, 57 (1), 37–44. [in English].
[10]    Rutkevych, V., Kupchuk, I., Yaropud, V., Hraniak, V., Burlaka S. (2022). Numerical simulation of the liquid distribution problem by an adaptive flow distributor. Przegląd Elektrotechniczny,  2 (98), 64–69. [in English].
[11]    Rutkevych, V., Shargorodskyi, S. (2023). Doslidzhennia protsesu halmuvannia zernozbyralnoho kombaina za dopomohoiu  obiemnoi hidrotransmisii HST-90 [Study of the braking process of a grain harvester using volume hydrotransmission  GST-90] Tеkhnіkа, еnеrhеtykа, trаnspоrt АPK, 1 (120), 102–109. [in Ukrainian].
[12]    Hunkо, І.V., Stаdnіk, М.І., Shаrhоrоdskyi, S.А., Rуtkеvych, V.S. (2021). Kоmplеksnа systеmа fіltrаtsіi dlia zаmknutykh hіdrоsystеm sіlskоhоspоdаrskоhо оblаdnаnnia [Integrated filtration system for closed hydraulic systems of agricultural equipment]. Tеkhnіkа, еnеrhеtykа, trаnspоrt АPK, 1 (112), 113–125. [in Ukrainian].