Issue №: 2 (105)
The journal addresses the problems of creating and improving machinery and technologies for agriculture, food and processing industries, mechanical engineering, energy and transport.
THEORY AND PRACTICE OF WATER TREATMENT IN TECHNOLOGIES OF PROJECTING AGRICULTURAL MACHINES AND FORMING PROFESSIONAL COMPETENCIES OF THE FUTURE AGRICULTURAL
Kuril Vasiliy – Doctor of Agricultural Sciences, Full Professor of the Department of “Agroengineering and
technical service” of Vinnytsia National Agrarian University, Corresponding Member of NAAS (3,
Solnychna St., Vinnytsia, 21008, Ukraine, e-mail: kurilo_v@ukr.net).
Pryshlyak Viktor – PhD, Аssociate Professor of the Department of “Agroengineering and technical service”
of Vinnytsia National Agrarian University (3, Solnyshchaya St., Vinnytsia, 21008, Ukraine, e-mail:
viktor.prishlyak@i.ua).
THEORY AND PRACTICE OF WATER TREATMENT IN TECHNOLOGIES OF
PROJECTING AGRICULTURAL MACHINES AND FORMING PROFESSIONAL
COMPETENCIES OF THE FUTURE AGRICULTURAL
The main dimensional characteristics of plant stems, bulk density, humidity, crop yields, tensile
diagram and average stature strength indices, as well as the influence of cultivating agriculture on the
characteristics of plant strength are analyzed. The peculiarities of the design and technological schemes
of the segmental-type cutting apparatuses, which are the starting base of the calculation algorithm and
the substantiation of the cutting edge parameters of the working organs of the s.-g. cars It is offered in
engineering engineering technologies of designing working organs of the village of. machines
comprehensively and systematically study the mechanic-technological properties of stems that are able to
provide developed innovative pedagogical technologies and newest didactic teaching aids. Particular
attention is paid to the quality of conducting lectures, including the open, scientific and pedagogical level,
practical experience of the lecturer, which forms the basic theoretical basis for the process of cutting
plants. Further, this knowledge is expanding and deepening during laboratory and practical classes,
course design, training and production practices. It is shown that the use of educational didactic
materials, modern agricultural machines and their working bodies in the educational process contributes
to the development of motivation-value, creativity-cognitive and activity-practical criteria, which greatly
influences the formation of design professional competencies of agroengineering.
Key words: theory, practice, cutting of stems, characteristics, working bodies, agricultural machines,
agroengineering.
F. 9. Fig. 4. Ref. 11.
References
[1] Tsarenko, O. M., Voytyuk, D.G., Schweiko, V.M. & others (2003) Mekhaniko-tekhnolohichni
vlastyvosti silʹsʹkohospodarsʹkykh materialiv [Mechanical and technological properties of agricultural
materials] Kyiv: Meta [in Ukrainian].
[2] Tsarenko, O.M, Yatsun, S.S., Dovzhik, M.Ya., Oliynik, G.M. (2016) Mekhaniko-tekhnolohichni
vlastyvosti silʹsʹkohospodarsʹkykh materialiv [Methodical recommendations for the technology of
growing energy sugar beet]. Kyiv: Ahrarna osvita [in Ukrainian].
[3] Goryachkin, V.P. (1968) Sobranye sochynenyy [Collected Works], Vol. 3, Moscow: Kolos [in
Russian].
[4] Reznik, N. E. (1975) Teoriya rezaniya lezviyem i osnovy rascheta rezhushchikh apparatov [Theory of
cutting with a blade and the basics of calculating the cutting apparatus] Moscow: Mashinostroenie [in
Russian].
[5] Bosoy, E.S., Verniaev, O.V., Smirnov, I.I., Sultan Shah, E.G. (1977) Teoriya, konstruktsiya i raschet
sel'skokhozyaystvennykh mashin [Theory, design and calculation of agricultural machinery] Moscow:
Mashinostroenie [in Russian].
[6] Voytyuk, D.G, Tsarenko, O.M., Yatsun, S.S. & others (2000) Mekhaniko-tekhnolohichni vlastyvosti
silʹsʹkohospodarsʹkykh materialiv [Mechanical and technological properties of agricultural materials]
Kyiv: Agrarian Education [in Ukrainian].
[7] Aliev, E. B., Yaropud, V. M., Dudin, V. Yr., Pryshliak, V. M., Pryshliak, N. V., Ivlev, V. V. (2018)
Research on the separation of sunflower seeds by airflow, 56, No.3, 119-128, National institute of
research-development for machines and installations designed to agriculture and food industry.
[8] Kurylo, V. L. (2002) Ahrotekhnichni osnovy protsesiv mekhanizovanoho vyroshchuvannya nasinnya
tsukrovykh buryakiv [Agrotechnical bases of processes of mechanized cultivation of sugar beet seeds]
Kyiv: In-t sugar. beets UAAN [in Ukrainian].
[9] Kutsenko, A., Bondar, M., Pryshliak, V. (2018) Mechanics of materials: Theory and Problems
[Mechanics of materials: Theory and Problems] Kyiv: LLC "Center for Educational Literature".
[10] Voytyuk, D., Baranovsky, V., Bulgakov, V. & others (2005). Silʹsʹkohospodarsʹki mashyny. Osnovy
teoriyi ta rozrakhunku [Agricultural machines. Fundamentals of theory and calculation] Kyiv:
Vyshcha osvita [in Ukrainian].
[11] Malakov, O. I. (2018) Suchasnyy stan tekhnichnoho rivnya mashyn dlya skoshuvannya trav na sino
[The current state of the technical level of machines for mowing herbs on hay], 2(101), 139-144,
Tekhnika, enerhetyka, transport APK [in Ukrainian].
About the journal
G8 – Materials Science
G9 – Applied Mechanics
G10 – Metallurgy
G11 – Mechanical Engineering (by specializations)
The journal "Engineering, Energy, Transport AIC" is indexed according to the following databases and catalogs:
The All-Ukrainian scientific journal “Technology, energy, agriculture transport AIC” is an open-access scientific publication that publishes the results of original research, theoretical and applied developments, as well as scientific papers in the fields of engineering sciences, energy systems, and transport technologies of the agro-industrial complex.
The main objective of the scientific journal “Technology, energy, agriculture transport AIC” is to disseminate the results of modern scientific research and to promote the development of technical, energy, and transport solutions for the agro-industrial complex through the publication of scientific materials characterized by scientific novelty and practical significance in the field of design and modernization of machinery, equipment, and technologies.
The journal’s activities are focused on supporting the development of engineering science, stimulating the implementation of innovative approaches into industrial practice, as well as ensuring effective exchange of scientific achievements among researchers, educators, engineers, and other specialists in relevant fields.
Objectives of the Journal
To achieve its defined objective, the journal ensures the implementation of the following key tasks:
· publication of the results of fundamental and applied research covering the fields of applied mechanics, mechanical engineering, materials science, energy systems, electrical engineering, electromechanics, and transport systems of the agro-industrial sector;
· promotion of the implementation of advanced technical and technological developments aimed at improving the efficiency of machinery, equipment, and production processes;
· creation of conditions for active scientific exchange among research institutions, higher education institutions, industrial enterprises, and other interested organizations;
· support for the development of interdisciplinary research and expansion of cooperation among specialists in various fields of science and technology;
· promotion of the improvement of the scientific and technical level of research related to the design, modernization, and operation of technical equipment used in agro-industrial production;
· dissemination of information on modern achievements in science and technology and the implementation of innovative technologies in the fields of technical support, energy, and transport;
· development of a scientific information environment that facilitates effective scientific communication and the integration of national research into the international scientific community.
Publication frequency: 4 issues per year
Languages of publication: Ukrainian, English
Editor-in-Chief: Vitalii YAROPUD
State Registration: Decision of the National Council of Ukraine on Television and Radio Broadcasting № 1337 and № 1180. Media Identifier: R30-05173
EDRPOU Code: 00497236
Publisher ROR: https://ror.org/05m3ysc06
Publisher DOI Prefix: 10.37128
Technology, energy, agriculture transport AIC is a scholarly professional journal with a long-standing history and stable academic tradition, reflecting the evolution of engineering and technical sciences within the agro-industrial sector of Ukraine.
The journal was founded in 1997 under the title Bulletin of Vinnytsia State Agricultural Institute. According to the Resolution of the Presidium of the Higher Attestation Commission of Ukraine dated September 11, 1997, the publication obtained the status of a professional scientific journal, which enabled the publication of the main results of doctoral and candidate dissertations in technical sciences. From its inception, the journal positioned itself as an academic platform for addressing current issues of mechanization, electrification, and technical support of agricultural production. During 2001–2014, the journal was published under the title Proceedings of Vinnytsia National Agrarian University. Series: Technical Sciences (State Registration Certificate of Print Media KV No. 16644-5116 PR dated April 30, 2010). Throughout this period, a systematic approach to the selection and peer review of scientific manuscripts was established, the thematic scope of publications was expanded, and continuity of scientific directions as well as the development of sectoral engineering schools was ensured. Since 2015, the journal has been published under its current title, Technology, energy, agriculture transport AIC (State Registration Certificate No. 21906-11806 R dated March 12, 2016). The change of title reflected the expansion of the journal’s thematic coverage and its orientation toward interdisciplinary research in mechanical engineering, energy systems, electrical engineering, transport technologies, automation, and digital solutions for the agro-industrial complex.
