Issue №: 2(109)
В журналі вирішуються проблеми створення та удосконалення техніки та технологій для сільського господарства, харчових та переробних виробництв, машинобудування, енергетики та транспорту.
USE OF CRITERIAL SYNTHESIS AND ANALYSIS FOR MODERNIZATION OF OBJECTS OF MACHINE BUILDING PRODUCTION
Sevostyanov Ivan – Doctor of Technical Sciences, Full Professor of the Department of “Technological Processes and Equipment of Processing and Food Productions” of Vinnytsia National Agrarian University (3 Solnechnaya St, Vinnytsia, 21008, Ukraine, e-mail: ivansev70@gmail.com).
Svetlana Kravets – Assistant of the Department "General technical disciplines and labor protection" of the Vinnytsia National Agrarian University (3, Solnyschna St., Vinnytsia, 21008, Ukraine, e-mail: swkravec@ukr.net).
Pidlypna Maryna – Post-Graduate Student of Vinnytsia National Agrarian University (3, Solnychna str., Vinnytsia, Ukraine, 21008, e-mail: linak099@gmail.com).
Modernization problems of known equipment now are actual enough for different branches of the mechanical engineering. Therefore, a lot of time and efforts is spent on rationalization and automation of synthesis and analysis of modernized objects. The known methods and the software tools for synthesis and analysis of schemes of different equipment and technologies for the machine building production are not enough universal and labor-intensive, because a significant part of work for their realization is fulfilled by high-qualified specialists without of use of computers. There is an improved method of criterial synthesis and analysis elaborated in this article. This method allows with relatively small expenses of time to receive effective variants of different equipment with consideration of the all main initial conditions and parameters and with a possibility of determination with help of simple formulas of the most important criterions of their evaluation for founded selection of the most effective variant. Under realization of the proposed method as main initial parameters of the projected equipment for machining, loading-unloading or transportation are used: equipment destination, its admissible dimension, mass, working capacity, cost, power-consuming, accuracy. Taking in consideration these initial parameters at the next stages are selected admissible variants of modernization. Final evaluation and selection of the most prospective variants are made under criterions of admissible dimension, mass, working capacity, cost, power-consuming, degrees of standardization, unification and automation. At basis of the proposed method can be elaborated a computer program of automated synthesis and analysis for high-effective modernization of modern equipment and technologies for the machine building production.
[1] Sevostianov, I. V. (2014). Teoriia tekhnichnykh system: pidruchnyk [Theory of technical systems. Textbook]. Vinnytsia: VNTU [in Ukrainian].
[2] Kuznecov, Ju. M., Lucіv, І.V., Dubinjak, S.A. (1997). Teoriia tekhnichnykh system : pidruchnyk [Theory of technical systems. Textbook]. Kyiv - Ternopіl. [in Ukrainian].
[3] Chernousenko, O. Yu., Chepeliuk, O. O., Ryndiuk, D. V. (2016). Osnovy naukovykh doslidzhen ta inzhenernoi tvorchosti. Navchalnyi posibnyk [Foundations of scientific researches and engineering creativity. Textbook]. Kyiv: KPI by name Ihoria Sikorskoho. [in Ukrainian].
[4] Kapustin, N. M., Kuznecov, P. M. (2004). Avtomatizacija proizvodstvennyh processov v mashinostroenii [Automation of production process in the mechanical engineering]. Moscow: Vysshaya shkola. [in Russian].
[5] Shipinskij, V. G. (2016). Metody inzhenernogo tvorchestva : uchebnoye posobie [Methods of engineering creativity. Textbook]. Minsk : Vyshjejshaja shkola. [in Russian].
[6] Havrylov, E. V., Dmytryienko, M. F., Dolia, V. K. (2005). Osnovy teorii system i upravlinnia [Foundations of theory systems and management]. Kyiv: Znannia Ukrainy. [in Ukrainian].
[7] Norenkov, I. P. (2002). Osnovy` avtomatizirovannogo proektirovaniya [Foundations of automated projection]. Moscow: Izdatelstvo MGTU imeny N. E`. Baumana. [in Russian].
[8] Sevostianov, I. V. (2006). Ekspluatatsiia ta obsluhovuvannia mashyn. Navchalnyi posibnyk [Operation an servicing of machines]. Vinnytsia: VNTU. [in Ukrainian].
[9] Sevostianov, I. V. (2005). Ekspluatatsiia verstatnyh komplexiv. Navchalnyi posibnyk [Operation of machine tool complexes]. Vinnytsia: VNTU. [in Ukrainian].
[10] Sevostianov, I. V. (2015). Ratsionalna poslidovnist proektuvannia tekhnolohichnykh protsesiv skladannia [Rational sequence of projection of assemblage technological processes], 1, Naukovi pratsi Vinnytskoho natsionalnoho tekhnichnoho universytetu. [in Ukrainian].
About the journal
G8 – Materials Science
G9 – Applied Mechanics
G10 – Metallurgy
G11 – Mechanical Engineering (by specializations)
The journal "Engineering, Energy, Transport AIC" is indexed according to the following databases and catalogs:
The All-Ukrainian scientific journal “Technology, energy, agriculture transport AIC” is an open-access scientific publication that publishes the results of original research, theoretical and applied developments, as well as scientific papers in the fields of engineering sciences, energy systems, and transport technologies of the agro-industrial complex.
The main objective of the scientific journal “Technology, energy, agriculture transport AIC” is to disseminate the results of modern scientific research and to promote the development of technical, energy, and transport solutions for the agro-industrial complex through the publication of scientific materials characterized by scientific novelty and practical significance in the field of design and modernization of machinery, equipment, and technologies.
The journal’s activities are focused on supporting the development of engineering science, stimulating the implementation of innovative approaches into industrial practice, as well as ensuring effective exchange of scientific achievements among researchers, educators, engineers, and other specialists in relevant fields.
Objectives of the Journal
To achieve its defined objective, the journal ensures the implementation of the following key tasks:
· publication of the results of fundamental and applied research covering the fields of applied mechanics, mechanical engineering, materials science, energy systems, electrical engineering, electromechanics, and transport systems of the agro-industrial sector;
· promotion of the implementation of advanced technical and technological developments aimed at improving the efficiency of machinery, equipment, and production processes;
· creation of conditions for active scientific exchange among research institutions, higher education institutions, industrial enterprises, and other interested organizations;
· support for the development of interdisciplinary research and expansion of cooperation among specialists in various fields of science and technology;
· promotion of the improvement of the scientific and technical level of research related to the design, modernization, and operation of technical equipment used in agro-industrial production;
· dissemination of information on modern achievements in science and technology and the implementation of innovative technologies in the fields of technical support, energy, and transport;
· development of a scientific information environment that facilitates effective scientific communication and the integration of national research into the international scientific community.
Publication frequency: 4 issues per year
Languages of publication: Ukrainian, English
Editor-in-Chief: Vitalii YAROPUD
State Registration: Decision of the National Council of Ukraine on Television and Radio Broadcasting № 1337 and № 1180. Media Identifier: R30-05173
EDRPOU Code: 00497236
Publisher ROR: https://ror.org/05m3ysc06
Publisher DOI Prefix: 10.37128
Technology, energy, agriculture transport AIC is a scholarly professional journal with a long-standing history and stable academic tradition, reflecting the evolution of engineering and technical sciences within the agro-industrial sector of Ukraine.
The journal was founded in 1997 under the title Bulletin of Vinnytsia State Agricultural Institute. According to the Resolution of the Presidium of the Higher Attestation Commission of Ukraine dated September 11, 1997, the publication obtained the status of a professional scientific journal, which enabled the publication of the main results of doctoral and candidate dissertations in technical sciences. From its inception, the journal positioned itself as an academic platform for addressing current issues of mechanization, electrification, and technical support of agricultural production. During 2001–2014, the journal was published under the title Proceedings of Vinnytsia National Agrarian University. Series: Technical Sciences (State Registration Certificate of Print Media KV No. 16644-5116 PR dated April 30, 2010). Throughout this period, a systematic approach to the selection and peer review of scientific manuscripts was established, the thematic scope of publications was expanded, and continuity of scientific directions as well as the development of sectoral engineering schools was ensured. Since 2015, the journal has been published under its current title, Technology, energy, agriculture transport AIC (State Registration Certificate No. 21906-11806 R dated March 12, 2016). The change of title reflected the expansion of the journal’s thematic coverage and its orientation toward interdisciplinary research in mechanical engineering, energy systems, electrical engineering, transport technologies, automation, and digital solutions for the agro-industrial complex.
