Issue №: 3 (106)
The journal addresses the problems of creating and improving machinery and technologies for agriculture, food and processing industries, mechanical engineering, energy and transport.
ANALYSIS OF MODERN AUTOMATIC METHODS OF WASHING OF MILKING INSTALLATIONS
Babyn Ihor – Assistant of the Department of “Agricultural Machinery and Equipment” of Vinnytsia
National Agrarian University (3, Solnyshchaya str., Vinnytsia, 21008, Ukraine, e-mail: babyn@vsau.vin.ua).
According to ISO 3918: 2007, ISO 5707: 2007 and ISO 6690: 2007, the detergent system must be
designed and constructed so that detergents and disinfectants do not mix with milk. The proper
functioning of the circulating detergent system depends on the following factors: the design and
installation of the detergent system must ensure the proper volume of circulation, the speed and duration
of the detergent solutions; temperature and concentration should be appropriate for the types of cleaning
and disinfecting solutions. The purpose of the research is to analyze modern automatic ways of washing
milking machines and to determine the basic modes of operation of washing machines. The washing
machine is intended for washing and disinfection of milk systems and equipment of milking machines in
cowsheds with a restrained method of holding and non-milking, whereby milking is carried out in the
milking room. The washing machine is usually available in stock for standard and standard washing. The
principle of piling is based on repeated use of water and detergent. The washing machine for standard
washing is based on a circulating flushing system with a flow heater. Pre-rinsing and rinsing are done
with water plugs.
[1] ISO 3918. (2007). Milking machine installations – Vocabulary. Geneva, Switzerland: The
International for Standardization Organization. 42 p.
[2] ISO 5707. (2007). Milking machine installations – Construction and performance. Geneva,
Switzerland: The International for Standardization Organization. 52 p.
[3] ISO 6690. (2007). Milking machine installations – Mechanical tests. Geneva, Switzerland: The
International for Standardization Organization. 46 p.
[4] Shevchenko, I., Aliyev, E. (2013) Naukovo-metodychni rekomendatsiyi z bahatokryterialʹnoho
vyrobnychoho kontrolyu doyilʹnykh ustanovok [Scientific and methodological recommendations for
multicriteria production control of milking machines]. Zaporizhzhya: Aktsent Invest-treyd [in
Ukrainian].
[5] Shevchenko, Y.A., Alyev, É.B. (2013). Stratehyya razrabotky avtomatyzyrovannoy systemy
upravlenyya molochnym [Development Strategy for an Automated Dairy Management System], 3 (11),
37 – 43, Vestnyk VNYYMZH. Seryya: Mekhanyzatsyya, avtomatyzatsyya y mashynnye tekhnolohyy
v zhyvotnovodstve [in Russian].
[6] Zhmyrko, A. M. (2005). Obosnovanye parametrov y rezhymov raboty systemy moyky molokoprovoda
doylʹnykh ustanovok dlya doenyya korov v stoylakh [Substantiation of parameters and operating
modes of the milk system washing system for milking installations for milking cows in stalls]
Dissertation of PhD [in Russian].
[7] Kaletnik, H., Kulyk, M., Petrychenko, V., Khorishko, V. (2007) Osnovy perspektyvnykh tekhnolohiy
vyrobnytstva produktsiyi tvarynnytstva [Basis of advanced technologies of livestock production]
Vinnytsya: Enozis [in Ukrainian].
[8] Yaropud, V. (2018). Оbgruntuvannya konstruktyvno-rezhymnykh parametriv pulʹsatora doyilʹnoho
aparatu [Substantiation of design and mode parameters of milking machine pulsator], 1 (100), 55 –
62, Tekhnika, enerhetyka,transport APK [in Ukrainian].
About journal
131 - Applied Mechanics
132 - Materials Science
133 - Industry engineering
141 - Power engineering, electrical engineering and electromechanics
208 - Agricultural engineering
The magazine "Engineering, Energy, Transport AIC" is included in the list of scientific professional editions of Ukraine on technical sciences
(Category "Б", Order of the Ministry of Education and Science of Ukraine dated 02.07.2020 №886)
Old version of site: http://tetapk.vsau.edu.ua, http://techjournal.vsau.org
The journal "Engineering, Energy, Transport AIC" is indexed according to the following databases and catalogs:
Certificate of state registration of mass media: No. 21906-11806 P dated 03/12/2016.
Founder of the journal: Vinnytsia National Agrarian University
Editor-in-chief: Oleksii Tokarchuk - Ph.D., Associate Professor, VNAU (Vinnytsia)
Deputy Editor-in-Chief: Natalia Veselovska - Doctor of Technical Sciences, Full Prof., VNAU (Vinnytsia)
Executive Secretary: Yuriy Polevoda- Ph.D., Associate Professor, VNAU (Vinnytsia)
Members of the Editorial Board:
Tokarchuk O.A. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Veselovska N.R. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Agrarian University
Polevoda Yu.A. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Jordan Todorov Maximov - Doctor of Technical Sciences, Full Professor, Technical University of Gabrovo (Bulgaria)
Bulgakov V.M. - Doctor of Technical Sciences, Full Professor, Acad. NAAS, National University of Life and Environmental Sciences of Ukraine
Hraniak V.F. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Ivanchuk Y.V. - Doctor of Technical Sciences, Associate Professor, Vinnytsia National Technical University
Iskovich-Lototsky R.D. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Technical University
Kupchuk I.M. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Sevostianov I.V. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Agrarian University
Spirin A.V. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Tverdokhlib I.V. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Tsurkan A.V. - Doctor of Technical Sciences, Associate Professor, Vinnytsia National Agrarian University
Yaropud V.M. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Type of publication: journal
Kind of publication: scientific
Publication status: domestic
Year of foundation: 1997
Periodicity: 4 times per year
Volume: 18-20 conv. print. sheet (А4)
ISSN: 2520-6168 (print version), (online version)
Language of publication: (mixed languages) Ukrainian, English
The sphere of distribution and category of readers: national, foreign, faculty, scientists, entrepreneurs.
The periodical edition is included to the List of scientific professional publications of Ukraine on technical sciences, approved by order of the Ministry of Education and Science of Ukraine in 05.16.2016, No. 515.
The journal "Engineering, Energy, Transport AIC" is included in the "Catalog of Ukrainian Publications".
Subscription to the journal can be issued in each post office. The subscription index is 99720.
It was founded in 1997 under the title "Bulletin of the Vinnitsa State Agricultural Institute." According to the Decree of the Presidium of the Higher Attestation Commission of Ukraine of September 11, 1997, this publication received the status of a professional in which it is allowed to publish the main results of dissertation researches.
In 2001-2014 the journal published under the title “Collection of scientific works of Vinnytsia National Agrarian University. Series: Technical Sciences "(Certificate of State Registration of Mass Media KV No. 16644-5116 PR of 04/30/2010).
Since 2015 journal has title "Engineering, Energy, Transport AIC" (Certificate of State Registration of Mass Media No. 21906-11806 P dated 03/12/2016).
