BENDING THE RACIONAL CONSTRUCTION OF THE NATHIC MECHANISM VISOKOSHVIDKISNOЇ STRIGAL MACHINES
Hrytsun Anatolia – PhD, Associate Professor of the department Agricultural machinery of Vinnytsia National Agrarian University (3 Solnechnaya St., Vinnitsa, 21008, Ukraine, e-mail: email@example.com).
Babyn Ihor – assistant of the department Agricultural machinery of Vinnytsia National Agrarian University (3, Solnyshchaya str., Vinnytsia, 21008, Ukraine, e-mail: firstname.lastname@example.org).
The research was conducted to substantiate the rational design of the pressing mechanism, the lever and the eccentric mechanism of the cutter machine. The results of theoretical studies of technological and technical parameters of high-speed sweepers and some of their working bodies are presented. To substantiate the parameters of the design of the push mechanism by eliminating the deviations of the centers of the oscillations of the thrust rod and the lever from their optimal position in the direction perpendicular to the axis of symmetry of the machine, it is necessary to include in the drawing on the shells of the shaft heads tolerances on the mutual position of the holes under the center of the oscillation of the lever and the slope for the push mechanism . The axis of the hole under the center of the oscillation of the lever and the axis of the sloping hole under the push mechanism must be made on a high class of accuracy on the common plane perpendicular to the plane of the comb attachment.
 Bolotnov, P.M. & Ryzhov, S.V. (1988). Mechanization of work in sheep breeding [Mechanization of work in sheep breeding]. Moscow: Higher School [in Russian].
 Gernet, M.M. & Rabotyl'skiy, V.F. (1973). Opredeleniye momentov inertsii [Determination of moments of inertia]. Moscow: Mashinostroyeniye [in Russian].
 Kaletnik, G.V., Chusov, M.G., Shvayko V.M. (2011). Osnovy inzhenernykh metodiv rozrakhunkiv na mitsnist i zhorstkist : pidruchnyk [Fundamentals of engineering methods of calculations for durability and stiffness: a textbook.] Kiev: Hi-Tech Press[in Ukrainian].
 Mel'nikov, S.V. (1985). Tekhnologicheskoye oborudovaniye zhivotnovodcheskikh ferm i kompleksov [Technological equipment of livestock farms and complexes]. Leningrad: Agropromizdat [in the USSR].
 Revenko, I.I., Brahinets, M.V. & Revenko, V.I. (2009). Mashyny ta obladnannya dlya tvarynnytstva: pidruchnyk [dlya studentiv vyshchykh navchalʹnykh zakladiv] [Machines and equipment for livestock breeding: a textbook]. Kiev : Kondor [in Ukrainian].
 Revenko,I.I. & Veselivsʹkyy, K.D. (2013). Vdoskonalennya stryhalʹnoyi mashynky [Improving the typewriter]. (Vols. 1), (4 th rev.). Visnyk ahrarnoyi nauky Prychornomorʺya. [in Ukrainian].
The journal "Engineering, Energy, Transport AIC" on its pages presents materials on the following issues:
• Machine use in crop production and in animal husbandry
• Technical service of mobile equipment
• Processes and equipment for processing and food productions
• Mechanical engineering and material processing
• Energy technology and alternative energy sources
• Transport and transport-technological processes and equipment
• Automation of technological processes
• Opinion of a young scientist
ISSN (print): 2520-6168
Certificate of state registration of mass media: No. 21906-11806 P dated 03/12/2016.
Founder of the journal: Vinnytsia National Agrarian University
Editor-in-chief: Tokarchuk Olexiy A.
Ph.D., Assoc., VNAU (Vinnytsia)
Deputy Editor-in-Chief: Veselovska Nataliia R.
Doctor of Technical Sciences, Full Prof., VNAU (Vinnytsia)
Executive Secretary: Polevoda Yuri A.
Ph.D., Assoc., VNAU (Vinnytsia)
Members of the Editorial Board:
Tokarchuk O.A. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Veselovska N.R. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Agrarian University
Bulgakov V.M. - Doctor of Technical Sciences, Full Professor, Acad. NAAS, National University of Life and Environmental Sciences of Ukraine
Iskovich-Lototsky R.D. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Technical University
Bandura V. N. - Ph.D., Full professor, Vinnytsia National Agrarian University
Polevoda Yu.A. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Tsurkan A.V. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Ivanchuk Y.V. - Ph.D., Associate Professor, Vinnytsia National Technical University
Jordan Todorov Maximov - Doctor of Technical Sciences, Full Professor, Technical University of Gabrovo (Bulgaria)
Type of publication: journal
Kind of publication: scientific
Publication status: domestic
Year of foundation: 1997
Periodicity: 4 times per year
Volume: 18.75 conv. print. sheet
ISSN: 2520-6168 (print version), (online version)
Language of publication: (mixed languages) Ukrainian, Russian, English
The sphere of distribution and category of readers: national, foreign, faculty, scientists, entrepreneurs.
The periodical edition is included to the List of scientific professional publications of Ukraine on technical sciences, approved by order of the Ministry of Education and Science of Ukraine in 05.16.2016, No. 515.
The journal "Engineering, Energy, Transport AIC" is included in the "Catalog of Ukrainian Publications".
Subscription to the journal can be issued in each post office. The subscription index is 99720.
It was founded in 1997 under the title "Bulletin of the Vinnitsa State Agricultural Institute." According to the Decree of the Presidium of the Higher Attestation Commission of Ukraine of September 11, 1997, this publication received the status of a professional in which it is allowed to publish the main results of dissertation researches.
In 2001-2014 the journal published under the title “Collection of scientific works of Vinnytsia National Agrarian University. Series: Technical Sciences "(Certificate of State Registration of Mass Media KV No. 16644-5116 PR of 04/30/2010).
Since 2015 journal has title "Engineering, Energy, Transport AIC" (Certificate of State Registration of Mass Media No. 21906-11806 P dated 03/12/2016).