Engineering, Energy, Transport AIC

Oleksandr Voznyak – сandidate of Science (Engineering), Associate Professor of the Department of Electric Power Engineering, Electrical Engineering and Electromechanics of Vinnitsa National Agrarian University (3 Soniachna St., Vinnitsa, 21008, Ukraine, email: alex.voz1966@gmail.com, https://orcid.org/0000-0002-0986-6869).

Andrii Shtuts – Assistant Professor, Department of Electric Power Engineering, Electrical Engineering and Electromechanics, Vinnitsa National Agrarian University (3, Solnechna str., Vinnitsa, 21008, Ukraine, email: shtuts1989@gmail.com , https://orcid.org/0000-0002-4242-2100).

Volodymyr Tykhonov – Associate Professor of the Department of Physical Education, Vinnytsia National Technical University (Khmelnytske Shosse, 95, Vinnytsia, 21021, Ukraine, email: tykhonovvolodymyr@vntu.edu.ua).

During the reconstruction of existing and construction of new energy facilities, mostly modern imported equipment is used, which is not certified in Ukraine due to inconsistencies in domestic standards. This creates difficulties in coordinating projects with government agencies regarding building codes and regulations, energy efficiency requirements, safety requirements, and so on. There are also no standards in Ukraine regarding the functioning of the energy market. Therefore, it is necessary to update the array of ND industry, for the implementation of which it is necessary to develop appropriate scientific and methodological principles for improving the system of these documents.
The introduction of international standards as national standards of Ukraine will remove many controversial issues in the modernization of energy facilities, promote domestic energy equipment in the Western market, create conditions for parallel operation of Ukraine's energy system with European energy associations, improve the quality of energy. But updating the regulatory framework of the industry requires significant time and money, so it is necessary to properly organize this process in order to improve the technical and economic efficiency (EE) of energy in the shortest possible time with minimal costs. One of the methods of solving this problem is complex standardization (CS), the methodological foundations of which were laid in Soviet times, but are outdated due to changing economic conditions and basic criteria for assessing the efficiency of energy facilities, especially their impact on humans and the environment. Therefore, it is necessary to develop a new approach to the COP in the field of electricity in modern conditions, in particular, to develop a model of the COP, methods, classification of tasks and determine the priority of standardization in the field of electricity.
Standardization in the electricity sector should cover all major areas of industry development and contribute to the creation of conditions for safe operation of electricity facilities, ensuring rational energy consumption, improving the technical level and environmental safety of energy facilities, ensuring reliable and efficient operation of Ukraine's integrated energy system. Therefore, the development of the COP model should be based on the structural model of the power industry, which corresponds to the real conditions of the industry. To ensure the cost-effectiveness of the COP, it is necessary to develop a new methodology for evaluating EE development and implementation of standards for energy equipment in market conditions, as well as methodological approaches to economic optimization of the sequence of implementation of standards.
Thus, the development of scientific and methodological principles for improving the system of regulatory documents of the electric power industry of Ukraine is an urgent and important task, the solution of which will contribute to the effective updating of the regulatory framework of the industry.

[1]    Stadnik, M.I., Vydmysh, A.A., Shtucz, A.A., Kolisnyk, M.A. (2020). Intelektualni systemy v elektroenergetyci. Teoriya ta praktyka: navch. posib. Vinnycya: TOV "TVORY`". [in Ukranian].
[2]    Vozniak O. M., Shtuts A. A., Kolisnyk M. A. Suchasni systemy elektropryvodiv. Teoriia ta praktyka. Chastyna 1. Navchalnyi posibnyk. Vinnytsia: TOV "TVORY`". [in Ukranian].
[3]    Rozrakhunok nestandartnykh W-parametriv chotyrypoliusnyka na bipoliarnomu tranzystori. Vozniak O. M., Shtuts A. A.  Tekhnika, enerhetyka, transport. 2020. № 2 (109). S. 122-128. [in Ukranian].
[4]    Dogovir pro zasnuvannya Energetychnogo Spivtovarystva. Rezhym dostupu: http://zakon.rada.gov.ua/cgibin/laws/main.cgi?nreg=994_926&p=1283842403933260 [in Ukranian].
[5]    Richnyj oglyad diyalnosti Derzhenergonaglyadu za 2016 rik. Rezhym dostupu: http://mpe.kmu.gov.ua/minugol/doccatalog/do cument?id=245196539. [in Ukranian].
[6]    Richnyj oglyad diyalnosti Derzhenergonaglyadu za 2016 rik. Rezhym dostupu: http://mpe.kmu.gov.ua/minugol/doccatalog/do cument?id=245196539 [in Ukranian].
[7]    Merezhi Ukrenergo. Rezhy`m dostupu: https://ua.energy/about/merezhi-ukrenergo/ [in Ukranian].
[8]    Kuxarchuk V.V. (1998). Elementy teoriyi kontrolyu dynamichnyx parametriv elektrychnyx mashyn. UNIVERSUM. Vinnycya. [in Ukranian].
[9]    Lezhnyuk, P.D., Rubanenko, O.Ye., Zhuk, I.A. (2005). Diagnostuvannya sylovyx transformatoriv z vy`kory`stannyam nechitkyx mnozhyn. Visnyk Vinnyczkogo politexnichnogo instytutu. 1. 43–51 [in Ukranian].
[10]    Proekt Strategiyi stalogo rozvytku Ukrayiny do 2030 roku. [in Ukranian].
[11]    Programy diyalnosti Kabinetu Ministriv Ukrayiny. [in Ukranian].
[12]    Koalicijna Ugoda reformuvannya energetychnogo rynku [in Ukranian].
[13]    Zakon Ukrayiny «Pro zasady funkcionuvannya rynku elektrychnoyi energiyi». [in Ukranian].
[14]    Filyniuk, M. A., Havrilov, D. V., Lishchenko, S. A. (2002). Metody i zasoby vymiriuvannia parametriv potentsiino nestiikykh bahatopoliusnykiv. Visnyk Tekhnolohichnoho universytetu Podillia. Khmelnitsky. 42–48. [in Ukrainian].