Issue №: 3(118)
The journal solves the problems of creation and improvement of machinery and technologies for agriculture: 131 - Applied Mechanics, 132 - Materials Science, 133 - Industrial Engineering, 141 - Power Engineering, Electrical Engineering and Electromechanics, 208 - Agricultural Engineering.
INNOVATIVE APPROACHES AND METHODS OF INCREASING THE TECHNICAL LEVEL MACHINES AND UNITS
Olena Trukhanska – Ph.D, Associate Professor of the Department of “Agroengineering and Technical Service” of the Vinnytsia National Agrarian University (Sonyachna St.3, Vinnytsia, 21008, Ukraine e-mail: seaswallow@ukr.net, https://orcid.org/0000-0001-8481-8878).
Wear of parts is accompanied by a decrease in performance, especially with long-term use of machines, which causes deterioration in product quality.
The growth of the equipment of agricultural production with more advanced equipment, the conduct of integrated mechanization and increase the efficiency of equipment is developing, changing and repair production. The development of the field of restoration of worn parts is based on close cooperation of repair production with branch and basic science, and achievement of scientific and technical progress.
Deepening the method of group recovery technology to create a unified group equipment for surface restoration is a promising area of restoration technology in organizational terms. A large number of restored machine parts are discarded due to low wear of working surfaces, amounting to one percent of the initial weight of the parts. Research has proven and practically confirmed that the restoration of machinery, machines, and mechanisms is technically impossible to avoid, but on the other hand the restoration is economically feasible. The restored part serves the same term as the new one, and may exceed the service life of the new part.
The paper presents the results of research on the performance characteristics of coatings obtained by the developed technology. These studies were aimed at improving the quality of coatings that are restored by electro contact cauterization, namely to obtain uniform physical and mechanical properties in the cross section of the coating. The result is an upgraded technology, which involves cauterization of the powder with an electrode with a shaped contact surface with simultaneous surface plastic deformation of the surface.
[1] Sidashenko, O.I. (2014). Remont mashyn ta obladnannia: pidruchnyk [Repair of machines and equipment: a textbook]. K. Ahroosvita. [in Ukrainian].
[2] Baranovsky, V., Truhanska, O., Pankiv, M., Bandura, V. (2020). Research of a contact impact of a root crop with a screw auger. Research in Agricultural Engineering, 66. 33–42. [in English]
[3] Trukhanska, O.O. (2018). Pidvyshchennia yakosti remontu i tekhnichnoho obsluhovuvannia silskohospodarskoi tekhniky. Engineering, Energy, Transport AIC, 3 (102). 52–62. [in Ukrainian].
[4] Trukhanska, О. (2020). Technological methods of increasing wear resistance and durability of details. Engineering, Energy, Transport AIC, 4 (111). 109–115. [in English]
[5] Truhanska, O.O. (2020). Perspektivnі napryamki tekhnologії vіdnovlennya detalej mashin. Vibrations in engineering and technology, 3 (98). 104–110. [in Ukrainian]
[6] Shvets, L.V., Paladiichuk, Yu.B., Trukhanska, O.O. (2019.) Tekhnichnyi servis v APK. Tom I [Technical service in agriculture. Volume 1]. Vinnytsia: VNAU. [in Ukrainian].
About journal
131 - Applied Mechanics
132 - Materials Science
133 - Industry engineering
141 - Power engineering, electrical engineering and electromechanics
208 - Agricultural engineering
The magazine "Engineering, Energy, Transport AIC" is included in the list of scientific professional editions of Ukraine on technical sciences
(Category "Б", Order of the Ministry of Education and Science of Ukraine dated 02.07.2020 №886)
Old version of site: http://tetapk.vsau.edu.ua, http://techjournal.vsau.org
According to the decision of National Council of Television and Radio Broadcasting of Ukraine from 25.04.2024 No. 1337 the scientific journal «Engineering, Energy, Transport AIC» has the ID of the Media R30-05173.
The journal "Engineering, Energy, Transport AIC" is indexed according to the following databases and catalogs:
Certificate of state registration of mass media: No. 21906-11806 P dated 03/12/2016.
Founder of the journal: Vinnytsia National Agrarian University
Editor-in-chief: Oleksii Tokarchuk - Ph.D., Associate Professor, VNAU (Vinnytsia)
Deputy Editor-in-Chief: Natalia Veselovska - Doctor of Technical Sciences, Full Prof., VNAU (Vinnytsia)
Executive Secretary: Yuriy Polevoda- Ph.D., Associate Professor, VNAU (Vinnytsia)
Members of the Editorial Board:
Tokarchuk O.A. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Veselovska N.R. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Agrarian University
Polevoda Yu.A. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Jordan Todorov Maximov - Doctor of Technical Sciences, Full Professor, Technical University of Gabrovo (Bulgaria)
Bulgakov V.M. - Doctor of Technical Sciences, Full Professor, Acad. NAAS, National University of Life and Environmental Sciences of Ukraine
Hraniak V.F. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Ivanchuk Y.V. - Doctor of Technical Sciences, Associate Professor, Vinnytsia National Technical University
Iskovich-Lototsky R.D. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Technical University
Kupchuk I.M. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Sevostianov I.V. - Doctor of Technical Sciences, Full Professor, Vinnytsia National Agrarian University
Spirin A.V. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Tverdokhlib I.V. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Tsurkan A.V. - Doctor of Technical Sciences, Associate Professor, Vinnytsia National Agrarian University
Yaropud V.M. - Ph.D., Associate Professor, Vinnytsia National Agrarian University
Type of publication: journal
Kind of publication: scientific
Publication status: domestic
Year of foundation: 1997
Periodicity: 4 times per year
Volume: 18-20 conv. print. sheet (А4)
ISSN: 2520-6168 (print version), (online version)
Language of publication: (mixed languages) Ukrainian, English
The sphere of distribution and category of readers: national, foreign, faculty, scientists, entrepreneurs.
The periodical edition is included to the List of scientific professional publications of Ukraine on technical sciences, approved by order of the Ministry of Education and Science of Ukraine in 05.16.2016, No. 515.
The journal "Engineering, Energy, Transport AIC" is included in the "Catalog of Ukrainian Publications".
Subscription to the journal can be issued in each post office. The subscription index is 99720.
It was founded in 1997 under the title "Bulletin of the Vinnitsa State Agricultural Institute." According to the Decree of the Presidium of the Higher Attestation Commission of Ukraine of September 11, 1997, this publication received the status of a professional in which it is allowed to publish the main results of dissertation researches.
In 2001-2014 the journal published under the title “Collection of scientific works of Vinnytsia National Agrarian University. Series: Technical Sciences "(Certificate of State Registration of Mass Media KV No. 16644-5116 PR of 04/30/2010).
Since 2015 journal has title "Engineering, Energy, Transport AIC" (Certificate of State Registration of Mass Media No. 21906-11806 P dated 03/12/2016).
